OEM 2005 Lincoln LS Automatic Transmission Filter

2005 Lincoln LS Automatic Transmission Filter Parts Questions & Experts Answers

• Q: How to Service and Repair the In-Line Automatic Transmission Filter on 2005 Lincoln LS?

  A: Before repairing or servicing an in-line filter you need to check whether the transmission received an overhaul with an in-line filter present because replacing or installing such a filter is mandatory at this point. Without the presence of an in-line filter you must install the proper kit. A new in-line fluid filter kit must replace any other vehicle that lacked the in-line filter system. The installation of new transmissions that require no internal repairs should not include an inline filter or filter kit. The installation of a Ford-authorized remanufactured transmission requires using the provided in-line transmission fluid filter. The first step should involve setting the vehicle on a hoist while maintaining it in NEUTRAL gear. Remove a portion of the rubber hose to make space for adding the transmission fluid in-line filter. The filter operates with a bypass mechanism together with a red arrow for fluid direction marks; the filter needs installation into the transmission fluid cooler return line where the arrow points towards the transmission but away from the cooler. An improper installation leads to possible transmission internal damage. The filter must not accept rubber hoses or steel tubing when installing the filter because bends that exceed 60 degrees will damage it. Affix a clamp near the end of the filter before placing it into the rubber hose and apply clamps to both hose ends for tightening. Apply the transmission fluid pan sticker which asserts the use of an in-line filter on a clean visible section. To finish installation you need to put clean automatic transmission fluid in the transmission while checking it operates well and examining the filter for any fluid leakage.