FordParts
My Garage
My Account
Cart
OEM 2005 Lincoln Navigator Exhaust Pipe
Exhaust Tail Pipe- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Exhaust Pipes found
2005 Lincoln Navigator Muffler W/Tpipe Part Number: 6L7Z-5230-AB
Product Specifications- Other Name: Kit; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Muffler
- Base No.: 5230
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L7Z-5230-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Lincoln Navigator Exhaust Pipe Part Number: 5L7Z-5201-AA
Product Specifications- Other Name: Pipe - Exhaust; Tail Pipe; Rear Pipe
- Base No.: 5201
- Item Weight: 10.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L7Z-5201-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Lincoln Navigator Tail Pipe Part Number: 4L7Z-5K238-AA
Product Specifications- Other Name: Extension - Exhaust; Exhaust Pipe; Extension - Exhaust Pipe
- Item Weight: 2.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L7Z-5K238-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Lincoln Navigator Exhaust Pipe
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Lincoln Navigator Exhaust Pipe available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Lincoln Navigator Exhaust Pipe as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Lincoln Navigator Exhaust Pipe Parts Q&A
- Q: How to service and repair the dual converter Y-exhaust pipe on 2005 Lincoln Navigator?A: Service and repair work on the dual converter Y-pipe must begin with the vehicle set to neutral position on a hoist. First disconnect heated oxygen and catalyst monitor sensors before removing and discarding the catalytic converter-to-exhaust manifold nuts and reducing the clamp tension. The LH converter requires extra care to protect the converter inlet flare and manifold outlet flare and converter studs as the part is separated and removed. Perform the following procedure for the RH converter: Discard both flag nuts and converter-to-muffler flange bolts before using a suitable jack stand to stabilize the muffler and removing its isolators. Then lower the muffler assembly. When extracting the bolt along with its accompanying isolator cap and RH converter you need to maintain safety by avoiding contact damage to the manifold outlet flare and converter inlet flare and studs. Workers should detach heated oxygen and catalyst monitor sensors from their position and apply anti-seize lubricant to the threads before reinstalling them. All fasteners must remain loose until vehicle assembly starts from the front side. Always install new fasteners and gaskets while performing cleaning operations on the inlet pipe and catalytic converter together with the manifold outlet flare and converter inlet flare mating surfaces. Reinstallation requires following the removal steps while adjusting the exhaust system to achieve its maximum operational space. First tighten the nuts starting with the RH lower catalytic converter-to-exhaust manifold followed by the RH upper catalytic converter-to-exhaust manifold and transmission mount hanger bolt then exhaust clamp nut and finally alternate tightness of the LH catalytic converter-to-exhaust manifold nuts enabling the LH inner nut to be snug before tightening the LH outer nut to specification and finishing with a specification-tightened LH inner nut. Conclude the process by securely tightening all catalytic converter-to-muffler bolts.