FordParts
My Garage
My Account
Cart
OEM 2005 Mercury Montego EGR Valve
Emissions EGR Valve- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 EGR Valve found
2005 Mercury Montego EGR Valve Part Number: 5F9Z-9D475-BA
$100.44 MSRP: $165.27You Save: $64.83 (40%)Ships in 1 Business DayProduct Specifications- Other Name: Valve - Exhaust Gas Recirculation; Exhaust Gas Recirculation (EGR) Valve; EGR Vacuum Solenoid
- Replaces: 5F9Z-9D475-AA
- Base No.: 9D475
- Item Weight: 1.60 Pounds
- Item Dimensions: 5.5 x 4.4 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F9Z-9D475-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Mercury Montego EGR Valve
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Mercury Montego EGR Valve available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Mercury Montego EGR Valve as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Mercury Montego EGR Valve Parts Q&A
- Q: How to Service the EGR Valve System Module on 2005 Mercury Montego?A: The service of Exhaust Gas Recirculation (EGR) system module begins with four transaxle roll restrictor brace bolt removal before cleaning each bolt with a wire brush and applying new threadlocker onto threads followed by bolt torque to 55 Nm (41 lb-ft). The service process begins by cleaning second bolts from the transaxle roll restrictor brace before applying threadlocker to all parts which are subsequently tightened to 48 Nm (35 lb-ft). First detach the vacuum tube with electrical connector from the EGR system module and then remove and tighten the EGR system module-to-EGR system module tube fitting to 40 Nm (30 lb-ft). The EGR system module requires a new gasket with its raised ring placed toward the intake manifold before removing the two bolts and installing the module at 25 Nm (17 lb-ft). Throughout the installation process reverse all removal steps in order to finish the work.