FordParts
My Garage
My Account
Cart
OEM 2006 Ford Crown Victoria Coolant Temperature Sensor
Coolant Water Temperature Sensor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Coolant Temperature Sensors found
2006 Ford Crown Victoria Coolant Temperature Sensor Part Number: 9U2Z-12A648-A
$32.23 MSRP: $51.18You Save: $18.95 (38%)Ships in 1 Business DayProduct Specifications- Other Name: Sender Assembly; Engine Coolant Temperature Sensor; Temperature Switch; Temperature Sending Unit; Sensor
- Replaces: F4TZ-12A648-A, F2AZ-12A648-A, F2AZ-12A648-AA, F1AZ-12A648-B, E1AZ-12A648-A
- Base No.: 12A648
- Item Weight: 0.40 Pounds
- Item Dimensions: 8.7 x 7.8 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9U2Z-12A648-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford Crown Victoria Temperature Sensor Part Number: F7DZ-10884-AA
$15.63 MSRP: $25.22You Save: $9.59 (39%)Product Specifications- Other Name: Sender Assembly - Temperature; Engine Coolant Temperature Sender; Cooling Fan Switch; Temp Sender Gauge; Fan Switch; Sending Unit; Temperature Sending Unit; Temperature Gauge Sending Unit
- Base No.: 10884
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.3 x 4.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F7DZ-10884-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford Crown Victoria Coolant Temperature Sensor
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Crown Victoria Coolant Temperature Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Crown Victoria Coolant Temperature Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Ford Crown Victoria Coolant Temperature Sensor Parts Q&A
- Q: How to service the Coolant Temperature Sensor on 2006 Ford Crown Victoria?A: Service procedures for the engine temperature sensor begin with disconnecting the battery ground cable. Start the rotation of the tensioner clockwise to take off the accessory drive belt from the generator pulley before you loosen the two lower generator bolts to a torque setting of 25 Nm (18 lb-ft) for both bolts during reinstallation. The service procedure includes removing two generator bracket bolts then placing the generator bracket combination aside while tightening the hardware to 10 Nm (89 lb-in) during the reinstall process. Use the disconnecting tool to remove the electrical connector of the cylinder head temperature (CHT) sensor before using the 19 mm (0.74 in) 12 point crows foot to extract the CHT sensor. Remember that the sensor requires replacement because only new ones are usable. The new sensor must be tightened to 26 Nm (19 lb-ft) torque. The procedure ends with returning to the initial steps in reverse order for final installation.