Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2006 Ford Crown Victoria Ignition Lock Cylinder

Ignition Key Lock Cylinder
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ignition Lock Cylinders found

  • 2006 Ford Crown Victoria Ignition Lock Cylinder - 6W3Z-5421990-A
    2006 Ford Crown Victoria Ignition Lock Cylinder Diagram - 6W3Z-5421990-A
    View related parts

    2006 Ford Crown Victoria Lock Cylinder, Front Passenger Side
    Part Number: 6W3Z-5421990-A

    $65.72 MSRP: $101.13
    You Save: $35.41 (36%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Cylinder Assembly - Actuating; Door Lock Cylinder, Front Right; Door Lock Cylinder
    • Position: Front Passenger Side
    • Replaces: F6AZ-5421990-AA, F8AZ-5421990-AA
    • Base No.: 21990
    • Item Weight: 0.40 Pounds
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 6W3Z-5421990-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2006 Ford Crown Victoria Submodels:
    • Base, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
  • 2006 Ford Crown Victoria Ignition Lock Cylinder - 5W1Z-11582-BA
    2006 Ford Crown Victoria Ignition Lock Cylinder Diagram - 5W1Z-11582-BA
    View related parts

    2006 Ford Crown Victoria Ignition Lock Cylinder
    Part Number: 5W1Z-11582-BA

    Product Specifications
    • Other Name: Lockset - Complete Vehicle; Ignition Cylinder; Lock Cylinder
    • Base No.: 11582
    • Item Weight: 0.70 Pounds
    • Item Dimensions: 3.1 x 2.6 x 3.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5W1Z-11582-BA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2006 Ford Crown Victoria Submodels:
    • Base, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2006 Ford Crown Victoria Ignition Lock Cylinder

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Crown Victoria Ignition Lock Cylinder available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Crown Victoria Ignition Lock Cylinder as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Crown Victoria Ignition Lock Cylinder Parts Questions & Experts Answers

  • Q: How to Service and Repair a Non-Functional Ignition Lock Cylinder on 2006 Ford Crown Victoria?
    A: Everyone servicing a breakable ignition lock cylinder must start their procedure by disconnecting the battery. Start by removing the steering wheel then proceed with removing the tilt wheel handle alongside its shank. You must detach the three screws which keep the lower steering column shroud in place and set aside the shift selector boot if it exists. First remove the ignition cap before unlocking the tabs which will allow the passive anti-theft system (PATS) transceiver to slide off the steering column. Unplug the electrical wire before extracting the PATS transceiver unit. Drill the lock cylinder retaining pin with a 1/8-inch drill bit followed by drilling down the middle of the key slot using a 3/8-inch drill which will separate the ignition switch lock cylinder. Eliminate both the ignition switch lock cylinder and the column shavings from drilling and discard them properly while ensuring complete debris removal to check for column damage. Finishing the installation requires executing the reverse order of uninstallation steps.

Related 2006 Ford Crown Victoria Parts

Alternate Year Models

+
2005 Ford Crown Victoria Ignition Lock Cylinder 2007 Ford Crown Victoria Ignition Lock Cylinder