FordParts
My Garage
My Account
Cart
OEM 2005 Ford Crown Victoria Ignition Lock Cylinder
Ignition Key Lock Cylinder- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Ignition Lock Cylinders found
2005 Ford Crown Victoria Lock Cylinder, Front Passenger Side Part Number: 6W3Z-5421990-A
$65.72 MSRP: $101.13You Save: $35.41 (36%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Cylinder Assembly - Actuating; Door Lock Cylinder, Front Right; Door Lock Cylinder
- Position: Front Passenger Side
- Replaces: F6AZ-5421990-AA, F8AZ-5421990-AA
- Base No.: 21990
- Item Weight: 0.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W3Z-5421990-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Lockset - Complete Vehicle; Ignition Cylinder; Lock Cylinder
- Base No.: 11582
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.1 x 2.6 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5W1Z-11582-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Ford Crown Victoria Ignition Lock Cylinder
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Crown Victoria Ignition Lock Cylinder available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Crown Victoria Ignition Lock Cylinder as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Ford Crown Victoria Ignition Lock Cylinder Parts Q&A
- Q: How to service a non-functional ignition lock cylinder on 2005 Ford Crown Victoria?A: The service of a non-functional ignition lock cylinder starts with taking out the battery power. Start by unscrewing the steering wheel and proceed to remove the lower steering column shroud by taking out its three mounting screws. Twist off the covering from the ignition switch lock cylinder after moving aside the shift selector boot. The passive anti-theft system (PATS) transceiver can be removed from the steering column after you disconnect its electrical connector and unlock the tabs to slide it off. The lock cylinder retaining pin needs a 1/8-inch diameter drill to remove it while drilling the 3/8-inch diameter hole through the key slot will break the ignition switch lock cylinder free. First extract both the ignition switch lock cylinder plus drill residue from the steering column. After cleaning this space check it for damage. For the conclusion of installation follow the reverse order of disassembly.