How to Service and Repair Automatic Transmission Shift Levers on 2006 Ford Escape?

The service and repair of automatic transmission shift levers begins with the vehicle in neutral position on a hoist. Gently lever up to remove the top finish panel followed by the upper shift lever trim ring after placing the floor shift selector lever into (D) position. The shift cable requires removal from the gearshift assembly through two steps: first detach the shift cable end from the gearshift lever and then separate the shift cable from the bracket. The procedure to remove the shifter starts by disconnecting its electrical connector and after that unscrewing all 4 bolts to complete the removal. The first step for installation is to mount the shifter assembly using the 4 bolts and tighten them to 25 Nm (18 ft. lbs.) then reconnect the electrical connector. The installation process starts with the upper center console followed by the upper shift lever trim ring where proper orientation of the thick tab on the driver side front of the shifter should be checked before assembly. Conclude the process by readjusting the shift cable if required.

OEM 2006 Ford Escape Automatic Transmission Shift Levers

Automatic Transmission Shifter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Automatic Transmission Shift Levers found

View related parts
2006 Ford Escape Gear Shift Assembly Part Number: 5L8Z-7210-EA
$77.52 MSRP: $112.83
You Save: $35.31 (32%)
ADD TO CART
Product Specifications
- Other Name: Housing Assembly - Gear Shift
- Base No.: 7210B
- Item Weight: 3.80 Pounds
- Item Dimensions: 14.5 x 13.9 x 7.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L8Z-7210-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Escape Submodels:
- Hybrid, Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
2006 Ford Escape Gear Shift Assembly Part Number: 5L8Z-7210-AA
Product Specifications
- Other Name: Lever - Transmission Gear Shift
- Manufacturer Note: Gearshift Lever
- Base No.: 7210
- Item Weight: 3.60 Pounds
- Item Dimensions: 18.0 x 11.2 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L8Z-7210-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Escape Submodels:
- Hybrid, Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
2006 Ford Escape Shifter Assembly Part Number: 5M6Z-7210-C
Product Specifications
- Other Name: Lever - Gear Shift; Automatic Transmission Shift Lever; Shift Lever
- Base No.: 7210
- Item Weight: 4.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5M6Z-7210-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Escape Submodels:
- Hybrid | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV)

2006 Ford Escape Automatic Transmission Shift Levers

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Escape Automatic Transmission Shift Levers available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Escape Automatic Transmission Shift Levers as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Escape Automatic Transmission Shift Levers Parts Q&A

Q: How to Service and Repair Automatic Transmission Shift Levers on 2006 Ford Escape?
A: The service and repair of automatic transmission shift levers begins with the vehicle in neutral position on a hoist. Gently lever up to remove the top finish panel followed by the upper shift lever trim ring after placing the floor shift selector lever into (D) position. The shift cable requires removal from the gearshift assembly through two steps: first detach the shift cable end from the gearshift lever and then separate the shift cable from the bracket. The procedure to remove the shifter starts by disconnecting its electrical connector and after that unscrewing all 4 bolts to complete the removal. The first step for installation is to mount the shifter assembly using the 4 bolts and tighten them to 25 Nm (18 ft. lbs.) then reconnect the electrical connector. The installation process starts with the upper center console followed by the upper shift lever trim ring where proper orientation of the thick tab on the driver side front of the shifter should be checked before assembly. Conclude the process by readjusting the shift cable if required.