FordParts
My Garage
My Account
Cart
OEM 2007 Ford Escape Brake Shoe
Brake Shoe Set- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Brake Shoes found
2007 Ford Escape Parking Brake, Rear Part Number: 5L8Z-2A753-AA
$62.66 MSRP: $85.27You Save: $22.61 (27%)Product Specifications- Other Name: Shoe And Lining Assembly; Parking Brake Shoe, Rear; Brake Shoes; Parking Brake Shoes; Shoes; Parking Brake Shoe
- Position: Rear
- Base No.: 2648
- Item Weight: 3.30 Pounds
- Item Dimensions: 4.5 x 3.1 x 10.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L8Z-2A753-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Escape Brake Shoes, Rear Part Number: LU2Z-2V200-K
$44.51 MSRP: $66.65You Save: $22.14 (34%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Pad - Brake; Drum Brake Shoe, Rear; Parking Brake Shoe; Rear Shoes
- Position: Rear
- Replaces: 1U2Z-2V200-RBRM, 6L8Z-2200-A, BR-11441-A, YL8Z-2200-AB, BRF-1421
- Condition: New
- Fitment Type: Direct Replacement
- SKU: LU2Z-2V200-K
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Escape Brake Shoe
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Escape Brake Shoe available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Escape Brake Shoe as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Ford Escape Brake Shoe Parts Q&A
- Q: Is it essential to resurface brake drums when installing new rear brake shoes and linings on 2007 Ford Escape?A: The procedure for new brake shoe installation demands proper brake drum resurfacing to eliminate glazing and create uniform friction across both drum sides as well as restore roundness and eliminate bell-shaped deformations. Start your work by taking out the brake drum and moving forward with removal of the parking brake lever clip together with the two brake shoe retaining clips and two pins. The installation starts with removing the upper return spring followed by the self-adjuster assembly and lower return spring next followed by removal of the parking brake actuator lever before stripping off the rear brake shoes. The technique requires silicone grease application at brake shoe contact points on the backing plate before removing the self-adjuster spring and lever along with the pivot pin. The installation process ends by following all previous removal instructions while performing any necessary adjustments on the rear brake shoes.