How to Service the Crankshaft Position Sensor on 2006 Ford Escape?

Before servicing the crankshaft position (CKP) sensor you must first place the vehicle in neutral position and hoist it. First disconnect the battery ground cable before removing five bolts that secure the right-hand splash shield. Tighten these bolts to 9 Nm (80 lb-in) during reinstallation. The service process begins by unplugging both the CKP sensor hardware connector and removing the securing bolt on the sensor unit. The reinstallation procedure for CKP sensor requires torquing it to 10 Nm (89 lb-in). Check the O-ring seal for damage after which you should replace the component while applying clean engine oil during new seal installation according to the order of removal steps.

OEM 2006 Ford Escape Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Crankshaft Position Sensors found

View related parts
2006 Ford Escape Crankshaft Position Sensor
Part Number: 5L8Z-6C315-AA
$25.22 MSRP: $40.05
You Save: $14.83 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor; Sensor - Crankshaft Position - Cps
- Manufacturer Note: Also Used As Camshaft Position Sensor
- Base No.: 6C315
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.2 x 4.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L8Z-6C315-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Escape Submodels:
- Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2006 Ford Escape Crankshaft Position Sensor
Part Number: 1S7Z-6C315-AAA
$53.19 MSRP: $87.53
You Save: $34.34 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor - Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor; Sensor - Crankshaft Position - Cps
- Manufacturer Note: Service Kit With Sensor And Installation Tool
- Replaces: 1S7Z-6C315-BA
- Base No.: 6C315
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.8 x 2.4 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1S7Z-6C315-AAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Escape Submodels:
- XLS, XLT, XLT No Boundaries | 4 Cyl 2.3 L GAS
View related parts
2006 Ford Escape Crankshaft Position Sensor
Part Number: 5M6Z-6C315-A
$98.17 MSRP: $161.53
You Save: $63.36 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor; Sensor - Crankshaft Position - Cps
- Replaces: 3M6Z-6C315-AA
- Base No.: 6C315
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.2 x 2.7 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5M6Z-6C315-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, S, SE, XLS, XLT | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS

2006 Ford Escape Crankshaft Position Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Escape Crankshaft Position Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Escape Crankshaft Position Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Escape Crankshaft Position Sensor Parts Questions & Experts Answers

Q: How to Service the Crankshaft Position Sensor on 2006 Ford Escape?
A: Before servicing the crankshaft position (CKP) sensor you must first place the vehicle in neutral position and hoist it. First disconnect the battery ground cable before removing five bolts that secure the right-hand splash shield. Tighten these bolts to 9 Nm (80 lb-in) during reinstallation. The service process begins by unplugging both the CKP sensor hardware connector and removing the securing bolt on the sensor unit. The reinstallation procedure for CKP sensor requires torquing it to 10 Nm (89 lb-in). Check the O-ring seal for damage after which you should replace the component while applying clean engine oil during new seal installation according to the order of removal steps.