FordParts
My Garage
My Account
Cart
OEM 2006 Ford Escape Throttle Body
Fuel Injection Throttle Body- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Throttle Bodies found
2006 Ford Escape Throttle Body
Part Number: 5L8Z-9E926-AA$24.61 MSRP: $34.04You Save: $9.43 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Body Assembly - Carburetor Throttle; Fuel Inject Electronic Throttle Assembly; Body Assembly - Carburettor Throttle
- Base No.: 9E926
- Item Weight: 2.20 Pounds
- Item Dimensions: 8.0 x 6.1 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L8Z-9E926-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford Escape Throttle Body
Part Number: 5L8Z-9E926-AProduct Specifications- Other Name: Body Assembly - Carburetor Throttle; Fuel Inject Electronic Throttle Assembly
- Replaces: 5L8Z-9E926-AB
- Base No.: 9E926
- Item Weight: 2.20 Pounds
- Item Dimensions: 8.1 x 4.5 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L8Z-9E926-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford Escape Throttle Body
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Escape Throttle Body available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Escape Throttle Body as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Ford Escape Throttle Body Parts Questions & Experts Answers
- Q: How to service the throttle body on 2006 Ford Escape?A: Service of the throttle body starts with disconnecting the battery ground cable then removing the air cleaner outlet pipe. You need to drain coolant from the system while you remove the two bolts which secure the accelerator cable snow shield by tightening them to 10 Nm (89 lb-in). After disconnecting the speed control and accelerator cables from the throttle body you should proceed to detach the throttle position (TP) sensor electrical connector and the wiring retainer. The transaxle vent tube requires removal from the stud bolt along with two throttle body coolant hose disconnections. Remove the wiring retainer situated on the throttle body stud bolt while conducting a thorough examination of every sealing area. Three bolts must come out while you also remove the stud bolt and throttle body before disposing of the gasket. A new throttle body gasket should be installed during reinstallation where you must apply torque to 10 Nm (89 lb-in). Reverse all the removal steps and then proceed with filling your cooling system and performing the bleeding procedure.
Related 2006 Ford Escape Parts
2006 Ford Escape Fuel Pump
2006 Ford Escape Gas Cap
2006 Ford Escape Fuel Filler Neck
2006 Ford Escape Fuel Filter
2006 Ford Escape Fuel Tank
2006 Ford Escape Intake Manifold
2006 Ford Escape Intake Manifold Gasket
2006 Ford Escape Air Filter Box
2006 Ford Escape Air Intake Coupling
2006 Ford Escape Fuel Level Sensor
2006 Ford Escape Fuel Pump Tank Seal
2006 Ford Escape Throttle Body Gasket