OEM 2006 Ford F-250 Super Duty Antenna Cable

2006 Ford F-250 Super Duty Antenna Cable Parts Q&A

• Q: How to Service and Repair the Antenna Cable on 2006 Ford F-250 Super Duty?

  A: Starting antenna lead-in cable servicing requires users to detach the antenna base followed by moving the right-hand front fender splash shield away from the bulkhead. Start by taking off the two nuts along with screws and pin-type retainers before extracting the pin-type retainer and the lower right-hand A-pillar trim panel. Extract the connection of the antenna lead-in cable grommet from the bulkhead while guiding the supplementary cable length into the passenger section. Before installing the new audio unit keep in mind that the vehicle uses an antenna lead-in cable which connects to the instrument panel reinforcement and defroster air duct but never remove the original cable. Cut and eliminate the original antenna lead-in cable connectors and excess cable then keep the rest of the cable ends secure to prevent any rattles or identify issues. Install the new antenna lead-in cable by passing it into the passenger section and verify that the grommet fits securely while you fix the cable to the instrument panel reinforcement. The installation process requires the audio unit and pin-type retainer while also including reinstallation of the lower right-hand A-pillar trim panel. Place the antenna base into the cowl opening while you guide its cable before installing the right-hand front fender splash shield against the bulkhead using nuts and screws and pin-type retainer installments. Finally install the antenna base.