How to service the knock sensor (KS) on 2006 Ford F-250 Super Duty?

One must begin the knock sensor (KS) service by taking off the intake manifold. The first step for servicing the KS requires disconnecting its electrical connector followed by unfastening the two bolts that retain the sensor. The installation of the new knock sensor requires bolting to 20 Nm (15 lb-ft) torque before following the reverse order of removal for completion.

OEM 2006 Ford F-250 Super Duty Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

View related parts
2006 Ford F-250 Super Duty Knock Sensor
Part Number: 4L3Z-12A699-AA
$55.59 MSRP: $88.27
You Save: $32.68 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor - Engine Knock; Ignition Knock (Detonation) Sensor
- Base No.: 12A699
- Item Weight: 0.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L3Z-12A699-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL

2006 Ford F-250 Super Duty Knock Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford F-250 Super Duty Knock Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford F-250 Super Duty Knock Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford F-250 Super Duty Knock Sensor Parts Questions & Experts Answers

Q: How to service the knock sensor (KS) on 2006 Ford F-250 Super Duty?
A: One must begin the knock sensor (KS) service by taking off the intake manifold. The first step for servicing the KS requires disconnecting its electrical connector followed by unfastening the two bolts that retain the sensor. The installation of the new knock sensor requires bolting to 20 Nm (15 lb-ft) torque before following the reverse order of removal for completion.