Other Name: Center High Mount Stop Light Bulb, Engine Compartment, Trunk, Dome, Map, Interior, and Tail Light Bulbs.; Dome Lamp Assembly; Exterior Bulbs; Map Lamp Bulb
Base No.: 13466
Item Weight: 0.30 Pounds
Item Dimensions: 0.4 x 0.4 x 1.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: D8BZ-13466-A
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2006 Ford F-250 Super Duty Submodels:
Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L DIESEL
Other Name: Bulb, Turn Signal & Parking, Tail, Backup, License Plate, Side Marker, Headlight; Backup Lamp Bulb; Signal, Parking, Stop, High Mount, Cornering, License, and Parking Light Bulbs.
Position: Lower Outer
Replaces: F8DZ-13466-AB, E8AZ-13466-A
Base No.: 13466
Item Weight: 0.40 Pounds
Item Dimensions: 0.4 x 0.4 x 1.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: F5DZ-13466-B
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2006 Ford F-250 Super Duty Submodels:
Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
2006 Ford F-250 Super Duty Fog Light Bulb
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford F-250 Super Duty Fog Light Bulb available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford F-250 Super Duty Fog Light Bulb as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Ford F-250 Super Duty Fog Light Bulb Parts Q&A
Q: How to Service the Fog Light Bulb on 2006 Ford F-250 Super Duty?
A: You must start your service of the fog lamp bulb by placing both the headlamp switch and ignition switch in the OFF position. Separate the front license plate frame only in case the vehicle requires it. You need to remove the electrical connector before taking out the fog lamp bulb by handling it only by the base and staying away from the glass envelope because the halogen bulb contains high-pressure gas that could break when touched or dropped. Before bulb replacement one should keep the lamp open for a short time only since exposing the components to external contaminants can degrade performance through lens and reflector attachment. Fog lamp operation must always be prevented when a bulb is absent from the system. The installation of the new bulb requires following the steps in reverse order to the removal process.