My Garage
Cart

OEM 2006 Ford F-350 Super Duty Muffler

Exhaust Muffler
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Mufflers found

  • 2006 Ford F-350 Super Duty Muffler Diagram - 6C3Z-5230-G
    View related parts
    Product Specifications
    • Other Name: Muffler And Pipe Assembly - Rear; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe
    • Position: Rear
    • Base No.: 5230
    • Item Weight: 55.50 Pounds
    • Item Dimensions: 94.9 x 33.9 x 16.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 6C3Z-5230-G
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2006 Ford F-350 Super Duty Submodels:
    • King Ranch, Lariat, XL, XLT | 8 Cyl 5.4 L GAS
  • 2006 Ford F-350 Super Duty Muffler Diagram - 6C3Z-5230-E
    View related parts
    Product Specifications
    • Other Name: Muffler And Pipe Assembly - Rear; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit
    • Position: Rear
    • Replaces: 5C3Z-5230-B
    • Base No.: 5230
    • Item Weight: 52.00 Pounds
    • Item Dimensions: 95.4 x 32.3 x 16.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 6C3Z-5230-E
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2006 Ford F-350 Super Duty Submodels:
    • King Ranch, Lariat, XL, XLT
  • 2006 Ford F-350 Super Duty Muffler - 3C3Z-5230-AA
    2006 Ford F-350 Super Duty Muffler Diagram - 3C3Z-5230-AA
    View related parts
    Product Specifications
    • Other Name: Muffler And Pipe Assembly - Rear; Exhaust Muffler
    • Manufacturer Note: Muffler & outlet pipe asy. - Wide Frame WB (Raised over Axle) - exc. Harley Davidson model - 2003/2004 - BEFORE 7/18/2004
    • Position: Rear
    • Item Weight: 116.30 Pounds
    • Item Dimensions: 93.6 x 41.6 x 28.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 3C3Z-5230-AA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2006 Ford F-350 Super Duty Submodels:
    • King Ranch, Lariat, XL, XLT
  • 2006 Ford F-350 Super Duty Muffler - 6C3Z-5230-A
    2006 Ford F-350 Super Duty Muffler Diagram - 6C3Z-5230-A
    View related parts
    Product Specifications
    • Other Name: Muffler And Pipe Assembly - Rear; Exhaust Muffler
    • Position: Rear
    • Replaces: 3C3Z-5230-BB
    • Base No.: 5230
    • Item Weight: 45.80 Pounds
    • Item Dimensions: 89.9 x 33.9 x 16.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 6C3Z-5230-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2006 Ford F-350 Super Duty Submodels:
    • King Ranch, Lariat, XL, XLT

2006 Ford F-350 Super Duty Muffler

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford F-350 Super Duty Muffler available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford F-350 Super Duty Muffler as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford F-350 Super Duty Muffler Parts Q&A

  • Q: How to service and repair the muffler and tailpipe on 2006 Ford F-350 Super Duty?
    A: A vehicle hoist set to neutral position should support the vehicle for muffler and tailpipe service and repairs. Unfasten the connection between the catalytic converter and muffler or eliminate the exhaust intermediate pipe from muffler attachment. Remove the two muffler rear bracket nuts then disconnect rubber isolators to take out the muffler and tailpipe assembly. Install the muffler with tailpipe assembly by placing it correctly before attaching the rubber isolators. Install the two muffler rear bracket nuts only loosely. The exhaust coupling installation requires a clean surface without rust from an abrasive pad followed by placing a fresh coupling at the catalytic converter-to-muffler joint or exhaust intermediate-to-muffler junction point with the coupling point no further back than 4 mm (0.15 inch) from the end button. Combine the exhaust system and tighten the coupling connecting the catalytic converter to the muffler until it reaches 55 Nm (41 ft. lbs.), then secure the two rear bracket nuts to 20 Nm (15 ft. lbs.). Using new fasteners with the same part number as original components together with following torque specification during reassembly will help maintain proper exhaust component retention.