How to service the rear ABS sensor on 2006 Ford Focus?

The service procedure for the rear ABS sensor starts by disconnecting the battery ground cable. The vehicle should remain in neutral position while positioned on a hoist. Fasten the ABS sensor bolt at 9 Nm (80 inch lbs.) after securing it. There are sensor assembly components that are distinct from the whole unit and thus not reusable. You should first disconnect the ABS sensor wiring harness electrical connector followed by removing the sensor by detaching its small clip while extracting the sensor grommets from their retaining clips. Completion of the installation requires following the reverse sequence used during removal.

OEM 2006 Ford Focus ABS Sensor

ABS Wheel Speed Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 ABS Sensors found

View related parts
2006 Ford Focus ABS Sensor, Rear Passenger Side Part Number: YS4Z-2C190-BB
$53.27 MSRP: $89.27
You Save: $36.00 (41%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Rear Left, Rear Right; Rear Speed Sensor; ABS Wheel Speed Sensor
- Position: Rear Passenger Side
- Base No.: 2C190
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.7 x 1.6 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YS4Z-2C190-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Focus Submodels:
- LX, S, SE, SES, Sony Limited Edition, ST, SVT, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2006 Ford Focus ABS Sensor, Front Passenger Side Part Number: YS4Z-2B372-AA
$45.74 MSRP: $74.73
You Save: $28.99 (39%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Left, Front Right; ABS Speed Sensor; Front Speed Sensor; ABS Wheel Speed Sensor
- Position: Front Passenger Side
- Base No.: 2B372
- Item Weight: 0.40 Pounds
- Item Dimensions: 8.7 x 7.6 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: YS4Z-2B372-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Focus Submodels:
- LX, S, SE, SES, Sony Limited Edition, ST, SVT, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2006 Ford Focus ABS Sensor, Rear Part Number: YS4Z-2C190-CB
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Rear Left, Rear Right; Rear Speed Sensor; ABS Wheel Speed Sensor
- Position: Rear
- Base No.: 2C190
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.7 x 1.5 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YS4Z-2C190-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Focus Submodels:
- LX, S, SE, SES, Sony Limited Edition, ST, SVT, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS

2006 Ford Focus ABS Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Focus ABS Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Focus ABS Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Focus ABS Sensor Parts Q&A

Q: How to service the rear ABS sensor on 2006 Ford Focus?
A: The service procedure for the rear ABS sensor starts by disconnecting the battery ground cable. The vehicle should remain in neutral position while positioned on a hoist. Fasten the ABS sensor bolt at 9 Nm (80 inch lbs.) after securing it. There are sensor assembly components that are distinct from the whole unit and thus not reusable. You should first disconnect the ABS sensor wiring harness electrical connector followed by removing the sensor by detaching its small clip while extracting the sensor grommets from their retaining clips. Completion of the installation requires following the reverse sequence used during removal.