How to service the brake light switch on 2006 Ford Focus?

In order to service the brake light switch, unscrew the stoplamp switch counterclockwise and then unscrew it and then disconnect the electrical connector. Installation To install, this requires the complete removal of the plunger, maintaining the brake pedal in the on position during installation, then slowly release the pedal, and reconnect the electrical connector to the stoplamp switch.

OEM 2006 Ford Focus Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2006 Ford Focus Stoplamp Switch Part Number: YS4Z-13480-AA
$16.03 MSRP: $25.45
You Save: $9.42 (38%)
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Stop Light; Brake Light Switch
- Replaces: F5RZ-13480-A
- Base No.: 13480
- Item Weight: 0.20 Pounds
- Item Dimensions: 6.1 x 4.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YS4Z-13480-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Focus Submodels:
- LX, S, SE, SES, Sony Limited Edition, ST, SVT, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS

2006 Ford Focus Brake Light Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Focus Brake Light Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Focus Brake Light Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Focus Brake Light Switch Parts Q&A

Q: How to service the brake light switch on 2006 Ford Focus?
A: In order to service the brake light switch, unscrew the stoplamp switch counterclockwise and then unscrew it and then disconnect the electrical connector. Installation To install, this requires the complete removal of the plunger, maintaining the brake pedal in the on position during installation, then slowly release the pedal, and reconnect the electrical connector to the stoplamp switch.