How to service the rear bumper cover on the wagon on 2006 Ford Focus?

Service of the wagon rear bumper cover requires you to remove its four upper retainers designed as pins first. The service work starts with removing the loadspace side trim panel inserts and rear bumper cover nuts from both sides. Reinstall these components by tightening them to 5 Nm (44 lb-in). Set the vehicle on a hoist in neutral position. Installation of new pin-type retainers needs the removal of two existing retainers from both sides before placing the splash shield to the side. Each of the two rear bumper cover nuts requires removal before assembly during which time tighten them to 5 Nm (44 lb-in). The installation plan requires removal of both lower pin-type retainers as well as two outboard pin-type retainers. The painter's sealant requires a careful method that entails moving the bumper ends far from the fenders when loosening the retaining clips to safely remove the rear cover. The installation process requires the reverse order of removal steps to finish.

OEM 2006 Ford Focus Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Bumpers found

View related parts
2006 Ford Focus Reinforce Bar, Rear Part Number: 2M5Z-17906-BA
$245.24 MSRP: $339.27
You Save: $94.03 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Impact Bar, Rear
- Manufacturer Note: Impact Bar - Steel
- Position: Rear
- Replaces: YS4Z-17906-CA
- Base No.: 17906A
- Item Weight: 15.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2M5Z-17906-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Focus Submodels:
- SE, SES, ZTW, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2006 Ford Focus Reinforce Bar, Rear Part Number: 2M5Z-17906-CA
$138.39 MSRP: $191.45
You Save: $53.06 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Impact Bar, Rear
- Manufacturer Note: Steel
- Position: Rear
- Replaces: YS4Z-17906-EA
- Base No.: 17906
- Item Weight: 13.60 Pounds
- Item Dimensions: 75.6 x 12.5 x 51.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2M5Z-17906-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Focus Submodels:
- S, SE, SES, SVT, ZX3, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2006 Ford Focus Reinforce Bar, Rear Part Number: 3S4Z-17906-AA
$117.51 MSRP: $171.05
You Save: $53.54 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Impact; Bumper Impact Bar, Rear
- Manufacturer Note: Impact Bar - Steel
- Position: Rear
- Base No.: 17906
- Item Weight: 21.00 Pounds
- Item Dimensions: 60.4 x 12.6 x 12.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3S4Z-17906-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Focus Submodels:
- LX, S, SE, SES, Sony Limited Edition, ST, ZTS, ZX4, ZX4 ST | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2006 Ford Focus Bumper Cover, Rear Part Number: 6S4Z-17K835-BA
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Replaces: 4S4Z-17K835-BA
- Base No.: 17K835
- Item Weight: 14.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6S4Z-17K835-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Focus Submodels:
- S, SE, SES, ST, ZX4, ZX4 ST | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2006 Ford Focus Bumper Cover, Rear Part Number: 6S4Z-17K835-HAPTM
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Replaces: YS4Z-17K835-SAA, 3S4Z-17K835-FAA
- Base No.: 17K835
- Item Weight: 9.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6S4Z-17K835-HAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Focus Submodels:
- S, SE, SES, ZX3, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2006 Ford Focus Bumper Cover, Rear Part Number: 6S4Z-17K835-GAPTM
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Replaces: 3S4Z-17K835-DAA
- Base No.: 17K835
- Item Weight: 13.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6S4Z-17K835-GAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Focus Submodels:
- SE, SES, ZTW, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2006 Ford Focus Bumper Cover, Front Part Number: 6S4Z-17D957-DA
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Replaces: 5S4Z-17D957-DA
- Base No.: 17D957
- Item Weight: 19.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6S4Z-17D957-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Focus Submodels:
- S, SE, SES, ST, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2006 Ford Focus Bumper Cover, Front Part Number: 6S4Z-17D957-BAPTM
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Manufacturer Note: Paint to match
- Position: Front
- Base No.: 17D957
- Item Weight: 29.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6S4Z-17D957-BAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Focus Submodels:
- S, SE, SES, ST, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS

2006 Ford Focus Bumper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Focus Bumper available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Focus Bumper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Focus Bumper Parts Q&A

Q: How to service the rear bumper cover on the wagon on 2006 Ford Focus?
A: Service of the wagon rear bumper cover requires you to remove its four upper retainers designed as pins first. The service work starts with removing the loadspace side trim panel inserts and rear bumper cover nuts from both sides. Reinstall these components by tightening them to 5 Nm (44 lb-in). Set the vehicle on a hoist in neutral position. Installation of new pin-type retainers needs the removal of two existing retainers from both sides before placing the splash shield to the side. Each of the two rear bumper cover nuts requires removal before assembly during which time tighten them to 5 Nm (44 lb-in). The installation plan requires removal of both lower pin-type retainers as well as two outboard pin-type retainers. The painter's sealant requires a careful method that entails moving the bumper ends far from the fenders when loosening the retaining clips to safely remove the rear cover. The installation process requires the reverse order of removal steps to finish.