FordParts
My Garage
My Account
Cart
OEM 2006 Ford Freestyle Radiator
Cooling Radiator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Radiator found
2006 Ford Freestyle Radiator Part Number: 5F9Z-8005-AD
Product Specifications- Other Name: Radiator Assembly
- Replaces: 5F9Z-8005-AA
- Base No.: 8005
- Item Weight: 12.70 Pounds
- Item Dimensions: 34.2 x 7.2 x 22.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F9Z-8005-AD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford Freestyle Radiator
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Freestyle Radiator available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Freestyle Radiator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Ford Freestyle Radiator Parts Q&A
- Q: How to service the radiator on 2006 Ford Freestyle?A: The first step for radiator service calls for complete cooling system drainage. Start by taking off the air cleaner assembly and next follow it with the cooling fan motor and shroud. Then proceed with removing the front grille. Start the radiator service by removing both the upper radiator hose and lower radiator hose before placing them to the side. The horn assembly service requires disconnecting its electrical connector followed by removing the horn bolt which enables you to remove the assembly while tightening the bolt to 10 Nm (89 inch lbs.) before reinstalling. The A/C condenser maintenance requires bolt removal followed by placement of the condenser aside while tightening its bolts to 6 Nm (53 inch lbs.) when reinstalling. The next step requires removing two radiator support bracket bolts but reinstalling them tight at 6 Nm (53 inch lbs.). Move the radiator forward after removing its support brackets then take out the transmission cooler bracket bolt while tightening it to 6 Nm (53 inch lbs.) for reinstallation. Extract the transmission cooler off its retainers before placing it aside while taking out the radiator. The installation ends by running through the reverse removal steps followed by cooling system fluid addition and bleeding.