FordParts
My Garage
My Account
Cart
OEM 2006 Ford Fusion Battery Cable
Car Battery Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Battery Cables found
2006 Ford Fusion Battery Cable Part Number: 6E5Z-14300-CP
$57.55 MSRP: $79.62You Save: $22.07 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Cable Assembly - Battery To Battery; Battery Cables; Positive Cable
- Replaces: 6E5Z-14300-CA
- Base No.: 14300A
- Item Weight: 3.70 Pounds
- Item Dimensions: 12.4 x 4.5 x 21.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6E5Z-14300-CP
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford Fusion Positive Cable Part Number: 6E5Z-14300-CR
Product Specifications- Other Name: Cable Assembly - Battery To Battery; Battery Cables
- Base No.: 14300A
- Item Weight: 3.80 Pounds
- Item Dimensions: 17.6 x 4.8 x 17.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6E5Z-14300-CR
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford Fusion Battery Cable Part Number: 6E5Z-14300-AA
Product Specifications- Other Name: Cable Assembly - Battery To Battery; Battery Cables; Positive Cable
- Base No.: 14300A
- Item Weight: 1.70 Pounds
- Item Dimensions: 7.0 x 19.4 x 23.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6E5Z-14300-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford Fusion Battery Cable
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Fusion Battery Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Fusion Battery Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Ford Fusion Battery Cable Parts Q&A
- Q: How to service and repair the battery cables on 2006 Ford Fusion?A: The battery cable repair process should start by placing the vehicle in neutral position then mounting it on a hoist. Delete the battery power while removing the bolt and nut and battery hold down bracket then tighten them upon reinstallation to 10 Nm (89 lb-in). After removing the bolt you should position the battery cable body ground terminal to the side before tightening it to 12 Nm (9 lb-ft) in the installation step. Reinstall the cable terminal of the BJB by tightening it to 8 Nm (71 lb-in). The battery cable transaxle ground terminal requires removal of its bolt and positioning aside while tightening to 10 Nm (89 lb-in) at reinstallation. Start by removing the starter solenoid terminal cover followed by removal of the nut to set aside the battery cable starter solenoid terminal, apply torque to 12 Nm (9 lb-ft) before final installation. The battery cable locator must be removed from the starter stud bolt before taking out the three battery cable locators from behind the engine. Reinstall the generator shield by tightening its two nuts to a torque value of 25 Nm (18 lb-ft). During reinstallation position the generator protective cover aside then remove the nut from the generator B+ terminal before securely fastening it to 12 Nm (9 lb-ft). To complete the installation reverse all steps of the removal procedure starting with reattaching the battery cables.