FordParts
My Garage
My Account
Cart
OEM 2006 Ford Fusion Brake Disc
Disc Rotor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Brake Discs found
2006 Ford Fusion Rotor, Rear Part Number: 9E5Z-2C026-B
$81.21 MSRP: $124.98You Save: $43.77 (36%)Ships in 1 Business DayProduct Specifications- Other Name: Rotor Assembly - Brake; Disc Brake Rotor, Rear; Disc - Brake; Disc Brake Rotor; Brake Rotor
- Position: Rear
- Replaces: 9E5Z-2C026-A
- Base No.: 2C026
- Item Weight: 10.50 Pounds
- Item Dimensions: 2.7 x 11.9 x 11.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 9E5Z-2C026-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford Fusion Rotor, Front Part Number: 6U2Z-1V125-H
$70.38 MSRP: $108.32You Save: $37.94 (36%)Ships in 1 Business DayProduct Specifications- Other Name: Rotor Assembly; Disc Brake Rotor, Front; Brake Rotor
- Position: Front
- Replaced by: 6U2Z-1V125-K
- Item Weight: 20.10 Pounds
- Item Dimensions: 2.9 x 14.0 x 13.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6U2Z-1V125-H
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford Fusion Brake Disc
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Fusion Brake Disc available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Fusion Brake Disc as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Ford Fusion Brake Disc Parts Q&A
- Q: How to service and repair the front brake disc on 2006 Ford Fusion?A: Placement of the vehicle on a hoist with transmission in neutral position is essential before beginning front brake rotor/disc servicing and repair work. Keep the brake caliper suspended from the brake hose at all times to avoid breakdown of components. Take off the brake caliper anchor plate bolts before placing the brake caliper along with pads and anchor plate as one piece while using mechanic's wire to support the caliper. Reinstallation requires drivers to tighten caliper bolts at 90 Nm torque while using 66 foot pounds force as the unit. Two brake disc screws need removal after which installation requires tightening them to 20 Nm (15 ft. lbs.). Clear the hub surface where the brake disc attaches before you apply anti-seize lubricant. The brake disc needs to be installed after executing the reverse removal procedure.