How to remove and replace the rear brake disc on Ford Fusion?

The first step toward brake disc change is to remove the wheel together with its tire. Position the parking brake lever in a backward direction to free up the brake caliper cable which can then be detached from its attachment point alongside the removal of the retaining clip from the cable conduit. Linked connections from the brake caliper should be removed before moving forward. Danger exists when allowing the brake caliper to dangle from the brake hose because this situation might result in brake damage. Set aside the brake caliper assembly with brake caliper anchor plate and brake pads by supporting it with mechanic's wire after removing its two anchor plate bolts. You should take out the two brake disc screws followed by the brake disc. The brake disc-to-hub mounting surface should be checked for rust and foreign material before installing with anti-seize lubricant applied. Stage in the new brake disc before tightening both screws to 20 Nm (15 lb-ft). After verifying there is no twist in the brake caliper hose position the brake caliper along with brake pads and brake caliper anchor plate assembly while tightening the two brake caliper anchor plate bolts to 70 Nm (52 lb-ft). The installation process requires you to reconnect the parking cable to the caliper followed by the lever adjustment before linking it to the parking brake lever. Also reinstall the cable conduit retaining clip. Put on the wheel together with the tire next, complete parking brake cycling to test normal functioning, and execute multiple brake operations to check proper brake performance.

How to service and repair the front brake disc on Ford Fusion?

Placement of the vehicle on a hoist with transmission in neutral position is essential before beginning front brake rotor/disc servicing and repair work. Keep the brake caliper suspended from the brake hose at all times to avoid breakdown of components. Take off the brake caliper anchor plate bolts before placing the brake caliper along with pads and anchor plate as one piece while using mechanic's wire to support the caliper. Reinstallation requires drivers to tighten caliper bolts at 90 Nm torque while using 66 foot pounds force as the unit. Two brake disc screws need removal after which installation requires tightening them to 20 Nm (15 ft. lbs.). Clear the hub surface where the brake disc attaches before you apply anti-seize lubricant. The brake disc needs to be installed after executing the reverse removal procedure.

OEM Ford Fusion Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Brake Discs found

View related parts
Ford Fusion Rotor, Rear Part Number: KJ5Z-2C026-A
$88.39 MSRP: $133.32
You Save: $44.93 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly - Brake; Disc Brake Rotor, Rear; Disc - Brake; Brake Rotor
- Position: Rear
- Replaces: G2MZ-2V026-TA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2020 Ford Fusion | Energi Platinum, Energi SE, Energi Titanium, Platinum, S, SE, SEL, Sport, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Rotor, Rear Part Number: 9E5Z-2C026-B
$86.63 MSRP: $133.32
You Save: $46.69 (36%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly - Brake; Disc Brake Rotor, Rear; Disc - Brake; Disc Brake Rotor; Brake Rotor
- Position: Rear
- Replaces: 9E5Z-2C026-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2012 Ford Fusion | Hybrid, S, SE, SEL, Sport | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Fusion Rotor, Front Part Number: 6U2Z-1V125-H
$77.34 MSRP: $116.65
You Save: $39.31 (34%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly; Disc Brake Rotor, Front; Brake Rotor
- Position: Front
- Replaced by: 6U2Z-1V125-K
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2012 Ford Fusion | Hybrid, S, SE, SEL, Sport | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Fusion Rotor, Rear Part Number: KS7Z-2C026-B
$90.15 MSRP: $133.32
You Save: $43.17 (33%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly - Brake; Disc Brake Rotor, Rear; Brake Rotor
- Position: Rear
- Replaces: G2MZ-2V026-MA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2020 Ford Fusion | Energi Platinum, Energi SE, Energi Titanium, Platinum, Platinum Hybrid, S, S Hybrid, SE, SE Hybrid, SEL, SEL Hybrid, Sport, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Rotor, Rear Part Number: KS7Z-2C026-A
$88.39 MSRP: $133.32
You Save: $44.93 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly - Brake; Disc Brake Rotor, Rear; Brake Rotor
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Ford Fusion | Platinum, S, SE, SEL, Sport, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Rotor, Front Part Number: KS7Z-1125-B
$100.67 MSRP: $151.83
You Save: $51.16 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly - Brake; Disc Brake Rotor, Front; Brake Rotor
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Ford Fusion | Platinum, S, SE, SEL, Sport, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Rotor, Front Part Number: KS7Z-1125-A
$106.30 MSRP: $160.33
You Save: $54.03 (34%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly - Brake; Disc Brake Rotor, Front; Brake Rotor
- Position: Front
- Replaces: BRRF-307, BRRF-330, DG9Z-1125-GA, BRRF-328, DG9Z-1125-C, DG9Z-1125-G, BRRF-117, DG9Z-1125-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2020 Ford Fusion | Platinum, Platinum Hybrid, S, S Hybrid, SE, SE Hybrid, SEL, SEL Hybrid, Sport, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Rotor, Front Part Number: K2GZ-1125-B
$98.57 MSRP: $148.67
You Save: $50.10 (34%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly - Brake; Disc Brake Rotor, Front; Disc - Brake; Brake Rotor
- Manufacturer Note: RH/LH
- Position: Front
- Replaces: BRRF-316, BRRF-250, BRRF-319, F2GZ-1125-D, F2GZ-1125-E, G3GZ-1125-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2020 Ford Fusion | Platinum, S, SE, SEL, Sport, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Rotor, Front Part Number: KS7Z-1125-C
$101.48 MSRP: $156.17
You Save: $54.69 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly - Brake; Disc Brake Rotor, Front; Brake Rotor
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2020 Ford Fusion | Energi Platinum, Energi SE, Energi Titanium, Sport | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 2.7 L GAS

Ford Fusion Brake Disc

OEM Brake Disc boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Brake Disc with long life and a perfect fit. Come to our website and find genuine Ford Fusion parts. We keep a wide inventory of OEM Fusion parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Brake Disc is another part in Ford Fusion which is responsible for the disacting brake system by affording the brake pads a place to exerts friction to stop or slow down the car. Located at the axle or the hub, the rotor turns with the wheel and when the brake is applied pressure from the master cylinder compresses the caliper and squeezes the pads onto the rotor. This mechanism ensures heat is easily dissipated particularly in the vented rotors that are designed with cooling fins characteristic of high performance applications. Ford Fusion models in the past years have used different kinds of Brake Discs such as the solid and vented types. Drilled rotors are mostly used on small regular cars that are not sports utility vehicles while vented rotors are preferred due to the enhancement in heat dissipation. This is important, because, for instance, rotors may be out of round or warped, scored or exhibit excessive runout and this will affect braking. Conducting periodic examination for replacement of the Brake Disc is vital in achievement of Safe and dependable Ford Fusion automobiles.

Ford Fusion Brake Disc Parts and Q&A

Rotor, Rear
9E5Z-2C026-B
Q: How to remove and replace the rear brake disc on Ford Fusion?
A:
The first step toward brake disc change is to remove the wheel together with its tire. Position the parking brake lever in a backward direction to free up the Brake Caliper cable which can then be detached from its attachment point alongside the removal of the retaining clip from the cable conduit. Linked connections from the brake caliper should be removed before moving forward. Danger exists when allowing the brake caliper to dangle from the brake hose because this situation might result in brake damage. Set aside the brake caliper assembly with brake caliper anchor plate and Brake Pads by supporting it with mechanic's wire after removing its two anchor plate bolts. You should take out the two brake disc screws followed by the brake disc. The brake disc-to-hub mounting surface should be checked for rust and foreign material before installing with anti-seize lubricant applied. Stage in the new brake disc before tightening both screws to 20 Nm (15 lb-ft). After verifying there is no twist in the brake caliper hose position the brake caliper along with brake pads and brake caliper anchor plate assembly while tightening the two brake caliper anchor plate bolts to 70 Nm (52 lb-ft). The installation process requires you to reconnect the parking cable to the caliper followed by the lever adjustment before linking it to the parking brake lever. Also reinstall the cable conduit retaining clip. Put on the wheel together with the tire next, complete parking brake cycling to test normal functioning, and execute multiple brake operations to check proper brake performance.
Rotor, Front
6U2Z-1V125-H
Q: How to service and repair the front brake disc on Ford Fusion?
A:
Placement of the vehicle on a hoist with transmission in neutral position is essential before beginning front brake rotor/disc servicing and repair work. Keep the Brake Caliper suspended from the brake hose at all times to avoid breakdown of components. Take off the brake caliper anchor plate bolts before placing the brake caliper along with pads and anchor plate as one piece while using mechanic's wire to support the caliper. Reinstallation requires drivers to tighten caliper bolts at 90 Nm torque while using 66 foot pounds force as the unit. Two brake disc screws need removal after which installation requires tightening them to 20 Nm (15 ft. lbs.). Clear the hub surface where the brake disc attaches before you apply anti-seize lubricant. The brake disc needs to be installed after executing the reverse removal procedure.