How to service and repair the clutch slave cylinder safely on 2006 Ford Fusion?

When servicing the clutch slave cylinder, do not work with the brake fluid that can irritate the eyes and harm the surfaces. Do not touch, in case of contact; wash eyes and seek medical attention. Unscrew the brake fluid, detach the line and fasten the new cylinder with the bolts tightened to 19Nm and greased and bled the system.

OEM 2006 Ford Fusion Clutch Slave Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Clutch Slave Cylinder found

View related parts
2006 Ford Fusion Slave Cylinder Part Number: 6M8Z-7A512-A
Product Specifications
- Other Name: Cylinder Assembly - Clutch Slave; Clutch Slave Cylinder
- Replaces: 1S4Z-7A512-AA
- Base No.: 7A508
- Item Weight: 1.00 Pounds
- Item Dimensions: 3.6 x 2.6 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6M8Z-7A512-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Fusion Submodels:
- S, SE, SEL, Sport | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS

2006 Ford Fusion Clutch Slave Cylinder

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Fusion Clutch Slave Cylinder available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Fusion Clutch Slave Cylinder as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Fusion Clutch Slave Cylinder Parts Q&A

Q: How to service and repair the clutch slave cylinder safely on 2006 Ford Fusion?
A: When servicing the clutch slave cylinder, do not work with the brake fluid that can irritate the eyes and harm the surfaces. Do not touch, in case of contact; wash eyes and seek medical attention. Unscrew the brake fluid, detach the line and fasten the new cylinder with the bolts tightened to 19Nm and greased and bled the system.