FordParts
My Garage
My Account
Cart
OEM 2006 Ford Fusion Thermostat
Engine Coolant Thermostat- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Thermostats found
2006 Ford Fusion Thermostat Housing Part Number: 3M4Z-8575-B
$30.23 MSRP: $48.00You Save: $17.77 (38%)Ships in 1 Business DayProduct Specifications- Other Name: Thermostat Assembly; Engine Coolant Thermostat Kit; Thermostat Housing Cover; Thermostat Integral; Thermostat, Coolant; Thermostat Unit; Thermostat; Engine Coolant Thermostat
- Replaces: 3M4Z-8575-A, 3M4Z-8575-AB
- Base No.: 8575
- Item Weight: 0.90 Pounds
- Item Dimensions: 8.7 x 7.7 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3M4Z-8575-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford Fusion Thermostat Part Number: 1X4Z-8575-EB
$9.73 MSRP: $15.45You Save: $5.72 (38%)Product Specifications- Other Name: Thermostat Assembly; Engine Coolant Thermostat
- Replaces: 1X4Z-8575-EA
- Base No.: 8575
- Item Weight: 0.40 Pounds
- Item Dimensions: 8.4 x 7.8 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1X4Z-8575-EB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford Fusion Thermostat
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Fusion Thermostat available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Fusion Thermostat as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Ford Fusion Thermostat Parts Q&A
- Q: How to service the thermostat and thermostat housing assembly for the 2.3L engine on 2006 Ford Fusion?A: Starting the repair process of the 2.3L engine thermostat and housing assembly requires hoisting the vehicle with neutral transmission while following these steps. Begin the service procedure by draining the cooling system followed by accession drive belt removal. The service requires you to disconnect both heater hose and lower radiator hose from the thermostat housing. The three housing bolts require removal together with the gasket so discard the old one. Use new thermostat housing gaskets while installing the new housing by tightening its bolts to 10 Nm (89 inch lbs.). To complete the procedure you need to perform cooling system filling and bleeding.