FordParts
My Garage
My Account
Cart
OEM 2006 Ford Fusion Throttle Body
Fuel Injection Throttle Body- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Throttle Bodies found
2006 Ford Fusion Throttle Body Part Number: 6E5Z-9E926-BA
$338.29 MSRP: $578.62You Save: $240.33 (42%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Throttle Body And Motor Assembly; Fuel Inject Electronic Throttle Body Assembly; Fuel Injection Throttle Body Assembly
- Base No.: 9E926
- Item Weight: 3.40 Pounds
- Item Dimensions: 8.2 x 7.8 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6E5Z-9E926-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford Fusion Throttle Body Part Number: 6E5Z-9E926-AA
Product Specifications- Other Name: Throttle Body And Motor Assembly; Fuel Inject Electronic Throttle Body Assembly; Fuel Injection Throttle Body Assembly
- Base No.: 9E926
- Item Weight: 4.40 Pounds
- Item Dimensions: 8.2 x 6.1 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6E5Z-9E926-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford Fusion Throttle Body
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Fusion Throttle Body available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Fusion Throttle Body as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Ford Fusion Throttle Body Parts Q&A
- Q: How to service and repair the throttle body on 2006 Ford Fusion?A: Begin service and repair of the throttle body by draining the cooling system first. The service begins by disassembling the air cleaner outlet pipe then you should disconnect the battery ground cable. Proceed by disconnecting the electronic throttle control electrical connector and the throttle body (TB) through coolant inlet and outlet hose separation. The four securing bolts holding the TB must be removed before throwing away the existing TB gasket. New TB gaskets must be used in the installation process while torque bolts to 10 Nm (89 lb-in) tension. Return the tools and execute the reverse removal steps before filling and bleeding the cooling system to finish the installation.