OEM 2006 Ford Mustang Clutch Master Cylinder

2006 Ford Mustang Clutch Master Cylinder Parts Q&A

• Q: How to service and repair the clutch master cylinder on 2006 Ford Mustang?

  A: Service and repair work on the clutch master cylinder can start by drawing brake and clutch reservoir fluid below the clutch reservoir nipple with a suitable suction gun. The reservoir hose from the brake and clutch reservoir requires removal for which you should apply a hose plug to stop fluid leakage. The suction accumulator requires removal of its two bolts followed by setting the suction accumulator set aside. Unhook the hydraulic line by removing its clip and slide off the pedal pin retaining clip. After disconnecting the clutch master cylinder from the clutch pedal by removing its two bolts you should tighten these bolts to 10 Nm (7 ft. lbs.) before reinstallation. You should extract the clutch master cylinder from the vehicle before disconnecting the reservoir hose from its base. The installation ends by following removal steps backward while adding new clamps to the reservoir hose before adding specified fluids to reservoirs and bleeding the clutch hydraulic system. Users should treat brake fluid with caution due to hazards it poses to eyes and painted or plastic surfaces; eye flush with running water for 15 minutes during exposure then clean any fluid spills instantly with water.