How to service the windshield wiper motor on 2006 Ford Mustang?

To replace the windshield wiper motor, unscrew the wiper arm, pivot shaft, disconnect linkage, and use Threadlock on the bolt in case used again and tighten the bolt with 17 Nm. Take out the three bolts of the motor, fit them again at 15 Nm and repeat the procedure of removal, but remember that the motor is delicate.

OEM 2006 Ford Mustang Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wiper Motor found

View related parts
2006 Ford Mustang Wiper Motor Part Number: 6L1Z-17508-AARM
Product Specifications
- Other Name: Remanufactured Motor Assembly - Wiper; Windshield Wiper Motor; Wiper Linkage; Motor & Linkage; Front Motor; Motor; Motor Assembly - Wiper
- Replaces: 4R3Z-17508-AA, 5L2Z-17508-AA, 6W6Z-17508-AA, 6L2Z-17508-AA, 2C3Z-17508-AA, WM-634, 2L1Z-17508-AA, 3L2Z-17508-AA, 4W6Z-17508-B, 6L1Z-17V508-AARM, 6L1Z-17508-AB, 6W1Z-17508-AA, 6W4Z-17508-AA, WM-681, WM-651, WM-652
- Base No.: 17508
- Item Weight: 4.30 Pounds
- Item Dimensions: 10.1 x 4.4 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L1Z-17508-AARM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Mustang Submodels:
- Base, GT, Shelby GT, Shelby GT500 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

2006 Ford Mustang Wiper Motor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Mustang Wiper Motor available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Mustang Wiper Motor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Mustang Wiper Motor Parts Q&A

Q: How to service the windshield wiper motor on 2006 Ford Mustang?
A: To replace the windshield wiper motor, unscrew the wiper arm, pivot shaft, disconnect linkage, and use Threadlock on the bolt in case used again and tighten the bolt with 17 Nm. Take out the three bolts of the motor, fit them again at 15 Nm and repeat the procedure of removal, but remember that the motor is delicate.