How to service the throttle body on 2006 Ford Ranger?

Service commencement on the throttle body begins with disconnecting the ground cable of the battery and detaching the air cleaner outlet pipe. Unmount the bolt alongside the snow shield before tightening them to 10 Nm (89 lb-in) upon restoration. Disconnect the throttle position sensor electrical connector then proceed to disconnect the accelerator cable followed by the speed control cable and return spring. The motorist must detach the three bolts and the stud bolt and remove the throttle body (TB) while discarding the TB gasket. Service of the TB requires removal of the TP sensor. First clean all surfaces on the throttle body seal area before adding a brand new TB gasket. Then reverse the steps of removal to reinstall the throttle body and tighten it to 10 Nm (89 lb-in).

OEM 2006 Ford Ranger Throttle Body

Fuel Injection Throttle Body

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Throttle Bodies found

View related parts
2006 Ford Ranger Throttle Body Part Number: 4L5Z-9E926-AA
Product Specifications
- Other Name: Body Assembly - Carburetor Throttle; Body Assembly - Carburettor Throttle
- Base No.: 9E926
- Item Weight: 1.50 Pounds
- Item Dimensions: 8.1 x 6.2 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L5Z-9E926-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Ranger Submodels:
- Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
2006 Ford Ranger Throttle Body Part Number: 6L5Z-9E926-A
Product Specifications
- Other Name: Body Assembly - Carburetor Throttle; Fuel Inject Electronic Throttle Assembly; Body Assembly - Carburettor Throttle
- Base No.: 9E926
- Item Weight: 1.50 Pounds
- Item Dimensions: 8.1 x 6.1 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L5Z-9E926-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 6 Cyl 4.0 L GAS
View related parts
2006 Ford Ranger Throttle Body Part Number: 7L5Z-9E926-A
Product Specifications
- Other Name: Body Assembly - Carburetor Throttle; Body Assembly - Carburettor Throttle
- Replaces: 3L5Z-9E926-BA, 2L5Z-9E926-BA
- Base No.: 9E926
- Item Weight: 2.10 Pounds
- Item Dimensions: 6.0 x 4.6 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L5Z-9E926-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Ranger Submodels:
- Edge, Sport, STX, Tremor, XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2006 Ford Ranger Throttle Body

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Ranger Throttle Body available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Ranger Throttle Body as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Ranger Throttle Body Parts Q&A

Q: How to service the throttle body on 2006 Ford Ranger?
A: Service commencement on the throttle body begins with disconnecting the ground cable of the battery and detaching the air cleaner outlet pipe. Unmount the bolt alongside the snow shield before tightening them to 10 Nm (89 lb-in) upon restoration. Disconnect the throttle position sensor electrical connector then proceed to disconnect the accelerator cable followed by the speed control cable and return spring. The motorist must detach the three bolts and the stud bolt and remove the throttle body (TB) while discarding the TB gasket. Service of the TB requires removal of the TP sensor. First clean all surfaces on the throttle body seal area before adding a brand new TB gasket. Then reverse the steps of removal to reinstall the throttle body and tighten it to 10 Nm (89 lb-in).