How to Ensure Proper Functionality of the Steering Wheel on a 2006 Ford Taurus?

Service of the steering wheel requires the supplemental restraint system (SRS) to be depowered along with opening the access door using a thin-blade screwdriver. Disconnect all power connection wires linking the air bag module with the accessory module. Take care while removing the steering wheel by directing the wiring connections through the small access at the back of the wheel. The correct method to remove the steering wheel from the column shaft requires turning the pinion shaft 120-130 revolutions but you should not use excessive force to keep from damaging the column or steering wheel bolt. The installation procedure mandates that you record the serial number along with the vehicle identification number (VIN) and steering wheel identification number for Ford Motor Company before sending these details. The installation requires correct wiring positioning through the steering wheel opening at its rear end before wheel assembly on the column shaft followed by nut tightness to 40 Nm (30 ft. lbs.). The driver air bag and steering wheel component electrical connectors should be brought together before the SRS is repowered with the access door securely sealed.

OEM 2006 Ford Taurus Steering Wheel

Navigation Steering Wheel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Steering Wheels found

View related parts
2006 Ford Taurus Steering Wheel Part Number: 5F1Z-3600-BAD
Product Specifications
- Other Name: Wheel Assembly - Steering
- Manufacturer Note: Medium Dark Parchment , Vinyl , with speed control, FROM 11/03/04
- Base No.: 3600
- Item Weight: 4.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F1Z-3600-BAD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Taurus Submodels:
- LX, SE, SEL, SES | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2006 Ford Taurus Steering Wheel Part Number: 5F1Z-3600-BAC
Product Specifications
- Other Name: Wheel Assembly - Steering
- Manufacturer Note: Medium Graphite - Leather & Wood, with speed control, FROM 10/13/04
- Base No.: 3600
- Item Weight: 5.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F1Z-3600-BAC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Taurus Submodels:
- LX, SE, SEL, SES | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2006 Ford Taurus Steering Wheel Part Number: 5F1Z-3600-AAB
Product Specifications
- Other Name: Wheel Assembly - Steering
- Manufacturer Note: Midnight Black , Leather , with speed control, FROM 10/14/04
- Base No.: 3600
- Item Weight: 5.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F1Z-3600-AAB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Taurus Submodels:
- LX, SE, SEL, SES | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2006 Ford Taurus Steering Wheel Part Number: 5F1Z-3600-AAA
Product Specifications
- Other Name: Wheel Assembly - Steering
- Manufacturer Note: Medium Dark Parchment - Leather, with speed control, FROM 10/20/04
- Base No.: 3600
- Item Weight: 5.20 Pounds
- Item Dimensions: 16.8 x 17.0 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F1Z-3600-AAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Taurus Submodels:
- LX, SE, SEL, SES | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2006 Ford Taurus Steering Wheel Part Number: 4F1Z3600AAE
Product Specifications
- Other Name: Wheel Assembly - Steering/Black; Wheel Assembly - Steering
- Item Weight: 5.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4F1Z3600AAE
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2006 Ford Taurus Submodels:
- LX, SE, SEL, SES | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2006 Ford Taurus Steering Wheel Part Number: 4F1Z-3600-AAD
Product Specifications
- Other Name: Wheel Assembly - Steering
- Manufacturer Note: Medium Dark Parchment - Vinyl, without speed control
- Base No.: 3600
- Item Weight: 4.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4F1Z-3600-AAD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Taurus Submodels:
- LX, SE, SEL, SES | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2006 Ford Taurus Steering Wheel

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Taurus Steering Wheel available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Taurus Steering Wheel as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Taurus Steering Wheel Parts Q&A

Q: How to Ensure Proper Functionality of the Steering Wheel on a 2006 Ford Taurus?
A: Service of the steering wheel requires the supplemental restraint system (SRS) to be depowered along with opening the access door using a thin-blade screwdriver. Disconnect all power connection wires linking the air bag module with the accessory module. Take care while removing the steering wheel by directing the wiring connections through the small access at the back of the wheel. The correct method to remove the steering wheel from the column shaft requires turning the pinion shaft 120-130 revolutions but you should not use excessive force to keep from damaging the column or steering wheel bolt. The installation procedure mandates that you record the serial number along with the vehicle identification number (VIN) and steering wheel identification number for Ford Motor Company before sending these details. The installation requires correct wiring positioning through the steering wheel opening at its rear end before wheel assembly on the column shaft followed by nut tightness to 40 Nm (30 ft. lbs.). The driver air bag and steering wheel component electrical connectors should be brought together before the SRS is repowered with the access door securely sealed.