How to service the thermostat on 2006 Ford Taurus?

The cooling system must be drain empty during a thermostat servicing session. Start the servicing process by taking out the three bolts securing the thermostat housing which you should set to the side. Investigate both the sealing surfaces while removing the thermostat housing O-ring seal. The installation procedure requires bolt tightness level at 12 Nm (9 ft. lbs.). The procedure for new thermostat installation involves following the opposite steps used during removal. The cooling system needs full fluid and air elimination for successful completion.

OEM 2006 Ford Taurus Thermostat

Engine Coolant Thermostat

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Thermostat found

View related parts
2006 Ford Taurus Thermostat
Part Number: YF1Z-8575-BA
$9.94 MSRP: $15.38
You Save: $5.44 (36%)
Product Specifications
- Other Name: Thermostat Assembly; Engine Coolant Thermostat
- Replaces: F58Z-8575-A, F5DZ-8575-A
- Base No.: 8575
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.1 x 4.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YF1Z-8575-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Taurus Submodels:
- GL, L, LX, SE, SE Comfort, SEL, SES, SHO, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS

2006 Ford Taurus Thermostat

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Taurus Thermostat available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Taurus Thermostat as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Taurus Thermostat Parts Questions & Experts Answers

Q: How to service the thermostat on 2006 Ford Taurus?
A: The cooling system must be drain empty during a thermostat servicing session. Start the servicing process by taking out the three bolts securing the thermostat housing which you should set to the side. Investigate both the sealing surfaces while removing the thermostat housing O-ring seal. The installation procedure requires bolt tightness level at 12 Nm (9 ft. lbs.). The procedure for new thermostat installation involves following the opposite steps used during removal. The cooling system needs full fluid and air elimination for successful completion.