How to service the Vehicle Speed Sensor on the Output Shaft on 2006 Ford Taurus?

The OSS sensor connector should be detached first before servicing the Output Shaft Speed sensor under the right-hand exhaust manifold. Assembly of the OSS sensor requires the cover to be removed first followed by disconnecting the connector and removing the bolt before tightening the bolt to 11 Nm (8 ft. lbs.) when reattaching the components. The service process begins with removing the OSS sensor after taking off its cover. A fresh sensor requires a preliminary lubrication of its OSS O-ring before use. The reverse steps needed to finish the installation must be performed.

OEM 2006 Ford Taurus Vehicle Speed Sensor

VSS

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Vehicle Speed Sensor found

View related parts
2006 Ford Taurus Speed Sensor Part Number: YF1Z-7H103-AA
$84.62 MSRP: $115.16
You Save: $30.54 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Output Shaft; Vehicle Speed Sensor; Sensor - Output Shaft Speed
- Manufacturer Note: Sensor - OSS, 1F2P-C*
- Base No.: 7H103
- Item Weight: 0.30 Pounds
- Item Dimensions: 8.7 x 7.9 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YF1Z-7H103-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Taurus Submodels:
- LX, SE, SE Comfort, SEL, SES, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2006 Ford Taurus Vehicle Speed Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Taurus Vehicle Speed Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Taurus Vehicle Speed Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Taurus Vehicle Speed Sensor Parts Q&A

Q: How to service the Vehicle Speed Sensor on the Output Shaft on 2006 Ford Taurus?
A: The OSS sensor connector should be detached first before servicing the Output Shaft Speed sensor under the right-hand exhaust manifold. Assembly of the OSS sensor requires the cover to be removed first followed by disconnecting the connector and removing the bolt before tightening the bolt to 11 Nm (8 ft. lbs.) when reattaching the components. The service process begins with removing the OSS sensor after taking off its cover. A fresh sensor requires a preliminary lubrication of its OSS O-ring before use. The reverse steps needed to finish the installation must be performed.