FordParts
My Garage
My Account
Cart
OEM 2006 Lincoln LS Canister Purge Valve
Vapor Canister Purge Valve EVAP- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Canister Purge Valves found
2006 Lincoln LS Purge Valve
Part Number: 3U5Z-9C915-C$48.18 MSRP: $75.20You Save: $27.02 (36%)Product Specifications- Other Name: Valve Assembly; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Canister Purge Valve; Purge Control Valve; Vapor Valve
- Replaces: 3W4Z-9C915-AA, 3U5Z-9C915-B, CX-1871
- Item Weight: 1.20 Pounds
- Item Dimensions: 5.5 x 2.7 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3U5Z-9C915-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Lincoln LS Vent Control Solenoid
Part Number: XW4Z-9F945-AAProduct Specifications- Other Name: Solenoid Assembly; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Solenoid
- Base No.: 9F945
- Item Weight: 2.20 Pounds
- Item Dimensions: 6.3 x 6.2 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XW4Z-9F945-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Lincoln LS Canister Purge Valve
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Lincoln LS Canister Purge Valve available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Lincoln LS Canister Purge Valve as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Lincoln LS Canister Purge Valve Parts Questions & Experts Answers
- Q: How to service and repair the evaporative emission canister purge valve on 2006 Lincoln LS?A: The first step for servicing and repairing the evaporative emission canister purge valve involves disconnecting the battery ground cable to prevent possible fuel vapor ignition from electrical sparks. The service area must stay free of both smoking and open flames as well as personal devices must avoid contact with fuel-related parts because of ignition hazards. The service begins with disconnecting the electrical connector from the EVAP canister purge valve along with removing the upper fuel vapor tube. The two nuts connecting the EVAP canister purge valve bracket need removal before tightening them to 27 Nm (20 lb-ft) torque during reinstallation. Detach the bracket from the studs then remove the EVAP canister purge valve after disconnecting the lower fuel vapor tube. First reverse all uninstallation steps to reinstall the components. A leak test must follow the installation process along with execution of the evaporative emission repair verification drive cycle for proper system operation.
Related 2006 Lincoln LS Parts
2006 Lincoln LS Catalytic Converter
2006 Lincoln LS EGR Valve
2006 Lincoln LS Muffler
2006 Lincoln LS Exhaust Manifold
2006 Lincoln LS EGR Valve Gasket
2006 Lincoln LS Exhaust Heat Shield
2006 Lincoln LS Exhaust Manifold Gasket
2006 Lincoln LS Exhaust Pipe
2006 Lincoln LS Tail Pipe
2006 Lincoln LS Vapor Canister