How to service the evaporative emission canister purge valve on 2005 Lincoln LS?

Cautious service of the evaporative emission canister purge valve needs the removal of the battery ground connection to avoid sparking chances due to fuel vapors. The technician must first detach the upper fuel vapor tube before unconnecting the electrical connector of the EVAP canister purge valve. Before reinstalling the bracket tightly to 27 Nm (20 lb-ft) torque, you need to remove two nuts securing the EVAP canister purge valve bracket. You will first disconnect the lower fuel vapor tube before removing the EVAP canister purge valve after unmounting the bracket from its studs. Installation of the new valve requires performing the exact removal procedures in reverse order. Testing for leaks should be followed by performing the evaporative emission repair verification drive cycle to verify proper system functionality.

OEM 2005 Lincoln LS Canister Purge Valve

Vapor Canister Purge Valve EVAP

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Canister Purge Valves found

View related parts
2005 Lincoln LS Purge Valve
Part Number: 3U5Z-9C915-C
$48.18 MSRP: $75.20
You Save: $27.02 (36%)
ADD TO CART
Product Specifications
- Other Name: Valve Assembly; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Canister Purge Valve; Purge Control Valve; Vapor Valve
- Replaces: 3W4Z-9C915-AA, 3U5Z-9C915-B, CX-1871
- Item Weight: 1.20 Pounds
- Item Dimensions: 5.5 x 2.7 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3U5Z-9C915-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Lincoln LS Submodels:
- Appearance, Base, LSE, Luxury, Premium, Sport, Ultimate | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
2005 Lincoln LS Vent Control Solenoid
Part Number: XW4Z-9F945-AA
Product Specifications
- Other Name: Solenoid Assembly; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Solenoid
- Base No.: 9F945
- Item Weight: 2.20 Pounds
- Item Dimensions: 6.3 x 6.2 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XW4Z-9F945-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Lincoln LS Submodels:
- Appearance, Base, LSE, Luxury, Premium, Sport, Ultimate | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS

2005 Lincoln LS Canister Purge Valve

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Lincoln LS Canister Purge Valve available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Lincoln LS Canister Purge Valve as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Lincoln LS Canister Purge Valve Parts Questions & Experts Answers

Q: How to service the evaporative emission canister purge valve on 2005 Lincoln LS?
A: Cautious service of the evaporative emission canister purge valve needs the removal of the battery ground connection to avoid sparking chances due to fuel vapors. The technician must first detach the upper fuel vapor tube before unconnecting the electrical connector of the EVAP canister purge valve. Before reinstalling the bracket tightly to 27 Nm (20 lb-ft) torque, you need to remove two nuts securing the EVAP canister purge valve bracket. You will first disconnect the lower fuel vapor tube before removing the EVAP canister purge valve after unmounting the bracket from its studs. Installation of the new valve requires performing the exact removal procedures in reverse order. Testing for leaks should be followed by performing the evaporative emission repair verification drive cycle to verify proper system functionality.