What precautions should be taken when servicing the front seat cushion to ensure safety and proper handling on 2006 Lincoln LS?

Safety glasses must always be worn when servicing the front seat cushion because they reduce the chance of air bag injury and you should never probe the air bag module connectors. Complete hand washing is necessary to eliminate sodium hydroxide residue which remains on the skin after the deployment process. Treatment of both seat parts must remain gentle avoiding any lift through the front inboard side shield or torque tube while also not making use of memory saver devices. The process starts by taking off the front seat before disconnecting SRS power and eventually removing the front seat backrest together with its seat track and associated nuts. The seat track-to-cushion stud requires the wire harness retainer detachment before removing four seat track-to-cushion nuts which need tightening to 20 Nm (15 lb-ft) when reinstalling. Remove the necessary electrical connectors before taking off the ventilation air lower blower assembly along with the climate-controlled seat module from the cushion pan. Solutions to the driver seat module should always be disconnected and properly removed when a module is present. Understand the retainers to free the cushion trim cover which disconnects it from the cushion pan and cushion foam pad as well as the climate-controlled seat cushion duct if present. The process finishes when you reinstall the front seat backrest followed by SRS system reactivation and complete check of its functionality and absence of faults before returning the customer's vehicle.

OEM 2006 Lincoln LS Seat Cushion

Seat Pad Cushion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Seat Cushions found

View related parts
2006 Lincoln LS Seat Cushion Pad, Passenger Side
Part Number: 4W4Z-54632A22-BA
Product Specifications
- Other Name: Pad; Seat Cushion
- Manufacturer Note: RH - Passenger
- Position: Passenger Side
- Base No.: <632A22
- Item Weight: 1.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4W4Z-54632A22-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Lincoln LS Submodels:
- Appearance, Base, Luxury, Premium, Sport, Ultimate | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
2006 Lincoln LS Seat Cushion Pad, Front Bottom Passenger Side
Part Number: 4W4Z-54632A22-AA
Product Specifications
- Other Name: Pad; Seat Cushion
- Manufacturer Note: RH - Passenger
- Position: Front Bottom Passenger Side
- Base No.: <632A22
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4W4Z-54632A22-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Lincoln LS Submodels:
- Appearance, Base, Luxury, Premium, Sport, Ultimate | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
2006 Lincoln LS Seat Back Pad, Driver Side
Part Number: 3W4Z-5464811-BB
Product Specifications
- Other Name: Pad - Seat Back
- Manufacturer Note: With Heated Seats
- Position: Driver Side
- Base No.: <64810
- Item Weight: 1.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W4Z-5464811-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Lincoln LS Submodels:
- Appearance, Base, LSE, Luxury, Premium, Sport, Ultimate | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
2006 Lincoln LS Seat Back Pad, Driver Side
Part Number: 3W4Z-5464811-AA
Product Specifications
- Other Name: Pad - Seat Back
- Manufacturer Note: Less Heated Seats
- Position: Driver Side
- Base No.: <64810
- Item Weight: 2.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W4Z-5464811-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Lincoln LS Submodels:
- Appearance, Base, LSE, Luxury, Premium, Sport, Ultimate | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
2006 Lincoln LS Seat Back Pad, Passenger Side
Part Number: 3W4Z-5464810-BB
Product Specifications
- Other Name: Pad
- Manufacturer Note: With Heated Seats
- Position: Passenger Side
- Base No.: <64810
- Item Weight: 3.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W4Z-5464810-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Lincoln LS Submodels:
- Appearance, Base, LSE, Luxury, Premium, Sport, Ultimate | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
2006 Lincoln LS Seat Back Pad, Passenger Side
Part Number: 3W4Z-5464810-AA
Product Specifications
- Other Name: Pad
- Manufacturer Note: Less Heated Seats
- Position: Passenger Side
- Base No.: <64810
- Item Weight: 3.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W4Z-5464810-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Lincoln LS Submodels:
- Appearance, Base, LSE, Luxury, Premium, Sport, Ultimate | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
2006 Lincoln LS Seat Cushion Pad, Driver Side
Part Number: 3W4Z-54632A23-BA
Product Specifications
- Other Name: Pad - Seat Cushion; Seat Cushion
- Manufacturer Note: LH - Driver
- Position: Driver Side
- Base No.: <632A22
- Item Weight: 2.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W4Z-54632A23-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Lincoln LS Submodels:
- Appearance, Base, LSE, Luxury, Premium, Sport, Ultimate | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
2006 Lincoln LS Seat Cushion Pad, Front Driver Side
Part Number: 3W4Z-54632A23-AA
Product Specifications
- Other Name: Pad - Seat Cushion; Seat Cushion
- Manufacturer Note: LH - Driver
- Position: Front Driver Side
- Base No.: <632A22
- Item Weight: 2.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W4Z-54632A23-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Lincoln LS Submodels:
- Appearance, Base, LSE, Luxury, Premium, Sport, Ultimate | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
2006 Lincoln LS Seat Cushion, Rear
Part Number: 3W4Z-54600A88-BA
Product Specifications
- Other Name: Pad - Rear Seat Cushion
- Position: Rear
- Base No.: <600A88
- Item Weight: 21.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W4Z-54600A88-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Lincoln LS Submodels:
- Appearance, Base, LSE, Luxury, Premium, Sport, Ultimate | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS

2006 Lincoln LS Seat Cushion

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Lincoln LS Seat Cushion available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Lincoln LS Seat Cushion as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Lincoln LS Seat Cushion Parts Questions & Experts Answers

Q: What precautions should be taken when servicing the front seat cushion to ensure safety and proper handling on 2006 Lincoln LS?
A: Safety glasses must always be worn when servicing the front seat cushion because they reduce the chance of air bag injury and you should never probe the air bag module connectors. Complete hand washing is necessary to eliminate sodium hydroxide residue which remains on the skin after the deployment process. Treatment of both seat parts must remain gentle avoiding any lift through the front inboard side shield or torque tube while also not making use of memory saver devices. The process starts by taking off the front seat before disconnecting SRS power and eventually removing the front seat backrest together with its seat track and associated nuts. The seat track-to-cushion stud requires the wire harness retainer detachment before removing four seat track-to-cushion nuts which need tightening to 20 Nm (15 lb-ft) when reinstalling. Remove the necessary electrical connectors before taking off the ventilation air lower blower assembly along with the climate-controlled seat module from the cushion pan. Solutions to the driver seat module should always be disconnected and properly removed when a module is present. Understand the retainers to free the cushion trim cover which disconnects it from the cushion pan and cushion foam pad as well as the climate-controlled seat cushion duct if present. The process finishes when you reinstall the front seat backrest followed by SRS system reactivation and complete check of its functionality and absence of faults before returning the customer's vehicle.