How to Safely Service and Install a Shock Absorber and Spring Assembly on 2006 Lincoln LS?

The shock absorber and spring assembly service can start by opening the luggage compartment lid and moving the trim cover to a side. Set aside and throw away the upper mount nuts of the shock absorber before securing new ones using 28 Nm (21 ft. lbs.) torque during assembly. The servicing procedure starts by placing the vehicle into neutral position then hoisting it for shock absorber maintenance. Next step involves removing the lower shock absorber bolt which must get tightened to 133 Nm (98 ft. lbs.) after installing the new piece. The installation process ends after executing the removal steps in reverse order. All vehicles have automatic gas-pressurized rear shock absorbers which extend without assistance therefore service personnel must avoid using heat or flames to prevent injuries. The performance of vital systems depends on suspension fasteners which require that any replaced parts have matching numbers and that reassembly torque values be maintained to achieve proper retention.

OEM 2006 Lincoln LS Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Shock Absorbers found

View related parts
2006 Lincoln LS Shock Absorber Part Number: 5W4Z-18125-BA
Product Specifications
- Other Name: Shock Absorber Assembly; Strut
- Base No.: 18125
- Item Weight: 6.80 Pounds
- Item Dimensions: 4.8 x 4.5 x 22.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 5W4Z-18125-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Lincoln LS Submodels:
- Appearance, Luxury, Premium, Sport, Ultimate | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
2006 Lincoln LS Strut Part Number: 5W4Z-18124-DA
Product Specifications
- Other Name: Shock Absorber Assembly
- Manufacturer Note: Green
- Base No.: 18124
- Item Weight: 7.90 Pounds
- Item Dimensions: 4.5 x 4.3 x 25.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 5W4Z-18124-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Lincoln LS Submodels:
- Sport, Ultimate | 8 Cyl 3.9 L GAS
View related parts
2006 Lincoln LS Shock Absorber Part Number: 5W4Z-18125-AB
Product Specifications
- Other Name: Shock Absorber Assembly; Strut
- Base No.: 18125
- Item Weight: 7.20 Pounds
- Item Dimensions: 4.6 x 4.5 x 21.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 5W4Z-18125-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Lincoln LS Submodels:
- Appearance, Luxury, Premium, Sport, Ultimate | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
2006 Lincoln LS Strut Part Number: 5W4Z-18124-BA
Product Specifications
- Other Name: Shock Absorber Assembly
- Manufacturer Note: Blue
- Base No.: 18124
- Item Weight: 7.40 Pounds
- Item Dimensions: 4.4 x 4.3 x 24.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 5W4Z-18124-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Lincoln LS Submodels:
- Sport, Ultimate | 8 Cyl 3.9 L GAS

2006 Lincoln LS Shock Absorber

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Lincoln LS Shock Absorber available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Lincoln LS Shock Absorber as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Lincoln LS Shock Absorber Parts Q&A

Q: How to Safely Service and Install a Shock Absorber and Spring Assembly on 2006 Lincoln LS?
A: The shock absorber and spring assembly service can start by opening the luggage compartment lid and moving the trim cover to a side. Set aside and throw away the upper mount nuts of the shock absorber before securing new ones using 28 Nm (21 ft. lbs.) torque during assembly. The servicing procedure starts by placing the vehicle into neutral position then hoisting it for shock absorber maintenance. Next step involves removing the lower shock absorber bolt which must get tightened to 133 Nm (98 ft. lbs.) after installing the new piece. The installation process ends after executing the removal steps in reverse order. All vehicles have automatic gas-pressurized rear shock absorbers which extend without assistance therefore service personnel must avoid using heat or flames to prevent injuries. The performance of vital systems depends on suspension fasteners which require that any replaced parts have matching numbers and that reassembly torque values be maintained to achieve proper retention.