How should the shock absorber and spring assembly be handled during removal and servicing on Lincoln LS?

The gas pressurized shock absorbers in the assembly extend automatically so technicians need to perform careful handling. The servicing process requires all heat applications and flame usage to be avoided because they can result in personal injuries. A spring compressor is necessary for shock absorber and spring assembly disassembly since the unit experiences high stress loads. Suspension fasteners serve a vital performance function so replacements must use identical part numbers for quality reasons and reassembly requires the exact torque values for proper retention. Start the process by removing the shock absorber with spring assembly while maintaining the shock absorber tube safe from excess force from the vise clamp. Make marks on the upper mount and shock absorber and spring to maintain assembly orientation. New spring installation requires verification of the part number against Vehicle Certification label spring codes. A spring compressor should be used to compress the spring followed by shock absorber rod holding and the nut removal and disposal. The installation process starts by extracting the spring together with spring compressor after separating the upper mount combination with dust boot from the shock absorber. When putting together the system check the spring seats at both levels for any damage and examine the spring insulator for wear because you might need to change the upper mount component. Verify the part number of the new spring by reading the information on the VC label. You need to examine the spring for paint damage scratches; a new spring is needed when paint damage is detected. Pitch the removed shock absorber into the vise before attaching the shock absorber along with spring compressor to the strut. Follow the points from disassembly by positioning the dust boot and upper mount together before installing a new nut while removing the spring compressor to complete the installation of shock absorber and spring assembly.

OEM Lincoln LS Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

25 Shock Absorbers found

View related parts
Lincoln LS Strut
Part Number: BU2Z-18V124-S
$80.40 MSRP: $109.41
You Save: $29.01 (27%)
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2004 Lincoln LS | Base, LSE | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
Lincoln LS Strut, Front
Part Number: BU2Z-18V124-R
Product Specifications
- Other Name: Shock Absorber Assembly - Front
- Position: Front
- Replaces: 1W4Z-18124-DA, AST-25
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2004 Lincoln LS | Base, LSE | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
Lincoln LS Strut
Part Number: 1W4Z-18124-AA
Product Specifications
- Other Name: Shock Absorber Assembly
- Manufacturer Note: Red
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2004 Lincoln LS | Base, LSE | 6 Cyl 3.0 L GAS
View related parts
Lincoln LS Strut
Part Number: 3W4Z-18V124-A
Product Specifications
- Other Name: Shock Absorber Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Lincoln LS | Base, LSE | 6 Cyl 3.0 L GAS
View related parts
Lincoln LS Strut
Part Number: 3W4Z-18V124-B
Product Specifications
- Other Name: Shock Absorber Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Lincoln LS | Base, LSE | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
Lincoln LS Strut
Part Number: 3W4Z-18V124-C
Product Specifications
- Other Name: Shock Absorber Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Lincoln LS | Base, LSE | 6 Cyl 3.0 L GAS
View related parts
Lincoln LS Strut
Part Number: 3W4Z-18V124-D
Product Specifications
- Other Name: Shock Absorber Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Lincoln LS | Base, LSE | 8 Cyl 3.9 L GAS
View related parts
Lincoln LS Strut
Part Number: 5W4Z-18124-DA
Product Specifications
- Other Name: Shock Absorber Assembly
- Manufacturer Note: Green
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2006 Lincoln LS | Sport, Ultimate | 8 Cyl 3.9 L GAS
View related parts
Lincoln LS Shock Absorber
Part Number: 5W4Z-18125-AB
Product Specifications
- Other Name: Shock Absorber Assembly; Strut
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2006 Lincoln LS | Appearance, Luxury, Premium, Sport, Ultimate | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
Lincoln LS Shock Absorber
Part Number: 5W4Z-18125-BA
Product Specifications
- Other Name: Shock Absorber Assembly; Strut
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2006 Lincoln LS | Appearance, Luxury, Premium, Sport, Ultimate | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
Lincoln LS Strut
Part Number: BU2Z-18V124-Q
Product Specifications
- Other Name: Shock Absorber Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2004 Lincoln LS | Base, LSE | 8 Cyl 3.9 L GAS
View related parts
Lincoln LS Strut
Part Number: BU2Z-18V125-BV
Product Specifications
- Other Name: Shock Absorber Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003 Lincoln LS | Base, LSE | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
Lincoln LS Shock Absorber
Part Number: BU2Z-18V125-BW
Product Specifications
- Other Name: Shock Absorber Assembly; Strut
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Lincoln LS | Base, LSE | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
Lincoln LS Strut
Part Number: BU2Z-18V125-T
Product Specifications
- Other Name: Shock Absorber Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004 Lincoln LS | Base | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
Lincoln LS Shock Absorber
Part Number: BU2Z-18V125-U
Product Specifications
- Other Name: Shock Absorber Assembly; Strut
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2002 Lincoln LS | Base, LSE | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
Lincoln LS Shock Absorber
Part Number: BU2Z-18V125-V
Product Specifications
- Other Name: Shock Absorber Assembly; Strut
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2002 Lincoln LS | Base, LSE | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
Lincoln LS Shock Absorber
Part Number: 5U2Z-18V125-VA
Product Specifications
- Other Name: Kit - Shock Absorber; Strut
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2002 Lincoln LS | Base, LSE | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
Lincoln LS Strut
Part Number: 1W4Z-18124-EA
Product Specifications
- Other Name: Shock Absorber Assembly
- Manufacturer Note: Silver
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2004 Lincoln LS | Base, LSE | 6 Cyl 3.0 L GAS
View related parts
Lincoln LS Strut
Part Number: 1W4Z-18124-FA
Product Specifications
- Other Name: Shock Absorber Assembly
- Manufacturer Note: BROWN
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2004 Lincoln LS | Base, LSE | 8 Cyl 3.9 L GAS
View related parts
Lincoln LS Shock Absorber
Part Number: 3W4Z-18125-AA
Product Specifications
- Other Name: Shock Absorber Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Lincoln LS | Base, LSE | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS

| Page 1 of 2 |Next >

1-20 of 25 Results

Lincoln LS Shock Absorber

Welcome to our website where you can discover high-quality, genuine Lincoln LS Shock Absorber. We offer an extensive inventory of OEM Lincoln LS Shock Absorber at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Lincoln LS Shock Absorber Parts Questions & Experts Answers

Strut
1W4Z-18124-AA
Q: How should the shock absorber and spring assembly be handled during removal and servicing on Lincoln LS?
A: The gas pressurized shock absorbers in the assembly extend automatically so technicians need to perform careful handling. The servicing process requires all heat applications and flame usage to be avoided because they can result in personal injuries. A spring compressor is necessary for shock absorber and spring assembly disassembly since the unit experiences high stress loads. Suspension fasteners serve a vital performance function so replacements must use identical part numbers for quality reasons and reassembly requires the exact torque values for proper retention. Start the process by removing the shock absorber with spring assembly while maintaining the shock absorber tube safe from excess force from the vise clamp. Make marks on the upper mount and shock absorber and spring to maintain assembly orientation. New spring installation requires verification of the part number against Vehicle Certification label spring codes. A spring compressor should be used to compress the spring followed by shock absorber rod holding and the nut removal and disposal. The installation process starts by extracting the spring together with spring compressor after separating the upper mount combination with dust boot from the shock absorber. When putting together the system check the spring seats at both levels for any damage and examine the spring insulator for wear because you might need to change the upper mount component. Verify the part number of the new spring by reading the information on the VC label. You need to examine the spring for paint damage scratches; a new spring is needed when paint damage is detected. Pitch the removed shock absorber into the vise before attaching the shock absorber along with spring compressor to the strut. Follow the points from disassembly by positioning the dust boot and upper mount together before installing a new nut while removing the spring compressor to complete the installation of shock absorber and spring assembly.