How to Service the Power Steering Reservoir on 2006 Lincoln Mark LT?

A suitable vacuum device will drain the power steering reservoir as the first step in servicing. You will need to remove the three bolts which secure the reservoir and afterward tighten them to 11 Nm (8 inch lbs) when reinstalling. The procedure begins with releasing the clamp on the return line from the reservoir before removing the suction line through the same disconnection method. You should reverse the steps used for reservoir removal to reinstall it while filling the power steering system.

OEM 2006 Lincoln Mark LT Power Steering Reservoir

Power Steering Fluid Reservoir Tank

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Power Steering Reservoir found

View related parts
2006 Lincoln Mark LT Power Steering Reservoir
Part Number: 5L3Z-3A697-AA
Product Specifications
- Other Name: Reservoir Assembly; Reservoir
- Manufacturer Note: Reservoir - power steering
- Replaces: 2L1Z-3A697-AA, F65Z-3A006-AA
- Base No.: 3A006
- Item Weight: 1.20 Pounds
- Item Dimensions: 7.4 x 4.7 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L3Z-3A697-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Lincoln Mark LT Submodels:
- Base | 8 Cyl 5.4 L GAS

2006 Lincoln Mark LT Power Steering Reservoir

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Lincoln Mark LT Power Steering Reservoir available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Lincoln Mark LT Power Steering Reservoir as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Lincoln Mark LT Power Steering Reservoir Parts Questions & Experts Answers

Q: How to Service the Power Steering Reservoir on 2006 Lincoln Mark LT?
A: A suitable vacuum device will drain the power steering reservoir as the first step in servicing. You will need to remove the three bolts which secure the reservoir and afterward tighten them to 11 Nm (8 inch lbs) when reinstalling. The procedure begins with releasing the clamp on the return line from the reservoir before removing the suction line through the same disconnection method. You should reverse the steps used for reservoir removal to reinstall it while filling the power steering system.