My Garage
Cart

OEM 2006 Lincoln Mark LT Throttle Body

Fuel Injection Throttle Body
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Throttle Body found

  • 2006 Lincoln Mark LT Throttle Body - 8L3Z-9E926-C
    2006 Lincoln Mark LT Throttle Body Diagram - 8L3Z-9E926-C
    View related parts

    2006 Lincoln Mark LT Throttle Body
    Part Number: 8L3Z-9E926-C

    $287.16 MSRP: $460.00
    You Save: $172.84 (38%)
    ADD TO CART
    Product Specifications
    • Other Name: Throttle Body And Motor Assembly; Electronic Fuel Injection Throttle Body Assembly.
    • Replaces: 8L3Z-9E926-B, 6L3Z-9E926-A, 8L3Z-9E926-A
    • Base No.: 9E926
    • Item Weight: 10.60 Pounds
    • Item Dimensions: 10.5 x 7.1 x 6.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 8L3Z-9E926-C
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2006 Lincoln Mark LT Submodels:
    • Base | 8 Cyl 5.4 L GAS

2006 Lincoln Mark LT Throttle Body

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Lincoln Mark LT Throttle Body available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Lincoln Mark LT Throttle Body as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Lincoln Mark LT Throttle Body Parts Questions & Experts Answers

  • Q: How to service the throttle body on 2006 Lincoln Mark LT?
    A: Service of the throttle body starts with removing the ground cable from the battery. Start by disconnecting the air cleaner together with its intake pipe. Detach the electronic throttle control electrical connector as well as the throttle position (TP) sensor electrical connector. Remove the four throttle body bolts before taking off the throttle body unit while discarding the TB O-ring seal. The new throttle body installation requires bolt tightening to 9 Nm (80 lb-in) followed by an extra 90-degree (1/4 turn) tightening. The installation ends with normal reversal of the removal processes. Manuals indicate that cleaning of the throttle body bore as well as plate surface areas should be omitted since a special protection layer exists there while safety rules apply to all fuel-related components because of their flammable nature.

Related 2006 Lincoln Mark LT Parts