My Garage
Cart

OEM 2007 Lincoln Mark LT Throttle Body

Fuel Injection Throttle Body
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Throttle Body found

  • 2007 Lincoln Mark LT Throttle Body - 8L3Z-9E926-C
    2007 Lincoln Mark LT Throttle Body Diagram - 8L3Z-9E926-C
    View related parts

    2007 Lincoln Mark LT Throttle Body
    Part Number: 8L3Z-9E926-C

    $287.16 MSRP: $460.00
    You Save: $172.84 (38%)
    ADD TO CART
    Product Specifications
    • Other Name: Throttle Body And Motor Assembly; Electronic Fuel Injection Throttle Body Assembly.
    • Replaces: 8L3Z-9E926-B, 6L3Z-9E926-A, 8L3Z-9E926-A
    • Base No.: 9E926
    • Item Weight: 10.60 Pounds
    • Item Dimensions: 10.5 x 7.1 x 6.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 8L3Z-9E926-C
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2007 Lincoln Mark LT Submodels:
    • Base | 8 Cyl 5.4 L GAS

2007 Lincoln Mark LT Throttle Body

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Lincoln Mark LT Throttle Body available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Lincoln Mark LT Throttle Body as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Lincoln Mark LT Throttle Body Parts Questions & Experts Answers

  • Q: How to service and repair the throttle body on 2007 Lincoln Mark LT?
    A: Begin the throttle body service by taking off the air cleaner together with the air cleaner intake pipe. The service and repair process requires removal of electronic throttle control and throttle position (TP) sensor electrical connectors. Unfasten the four bolts securing the throttle body (TB) then remove the TB with disposal of the TB O-ring seal. Replace the throttle body O-ring seal with a new one by applying engine coolant lubrication before placement. Reinstallation requires tightening bolt torque to 9 Nm (80 lb-in) but additional tightening by one-quarter turn represents 90 degrees. To finish the installation follow the reverse steps of the removal process. It is necessary to approach the throttle plate and bore carefully because any contact that could potentially damage either component. Furthermore you should stay away from smoking or open flames near fuel components since they can easily ignite.

Related 2007 Lincoln Mark LT Parts