FordParts
My Garage
My Account
Cart
OEM 2006 Lincoln Navigator Canister Purge Valve
Vapor Canister Purge Valve EVAP- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Canister Purge Valves found
2006 Lincoln Navigator Solenoid Valve Part Number: 6R3Z-9F945-AA
$57.11 MSRP: $83.13You Save: $26.02 (32%)Product Specifications- Other Name: Solenoid Assembly; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Vent Control Solenoid; Solenoid
- Replaces: 5U5Z-9F945-AA
- Base No.: 9F945
- Item Weight: 0.60 Pounds
- Item Dimensions: 5.8 x 4.0 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6R3Z-9F945-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Lincoln Navigator Purge Valve Part Number: 6L3Z-9C915-A
$103.43 MSRP: $170.18You Save: $66.75 (40%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Valve Assembly; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Canister Purge Valve; Purge Solenoid; Purge Control Valve
- Manufacturer Note: Valve And Bracket Asy
- Replaces: 5L3Z-9C915-AA
- Base No.: 9C915
- Item Weight: 1.10 Pounds
- Item Dimensions: 6.2 x 4.6 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L3Z-9C915-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Lincoln Navigator Canister Purge Valve
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Lincoln Navigator Canister Purge Valve available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Lincoln Navigator Canister Purge Valve as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Lincoln Navigator Canister Purge Valve Parts Q&A
- Q: How to service and repair the evaporative emission canister purge valve on 2006 Lincoln Navigator?A: The first step for servicing or repairing the evaporative emission canister purge valve requires disconnecting the battery ground cable because this step will prevent electrical sparks that could ignite fuel vapors. The first step should be to remove the EVAP canister purge valve electrical connector before disconnecting both fuel vapor tubes by unclipping their quick connect couplings. The EVAP canister purge valve should be taken from its bracket after disconnection. The installation of the new valve requires following the removal steps in reverse order. After completing installation, test the system for leaks by performing the required drive cycle to confirm the system works correctly.