FordParts
My Garage
My Account
Cart
OEM 2006 Lincoln Navigator Vapor Canister
Fuel Vapor Canister- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Vapor Canisters found
2006 Lincoln Navigator Vapor Canister Part Number: 6L1Z-9D653-A
Product Specifications- Other Name: Cannister - Fuel Vapour Storage; Vapor Canister Purge Solenoid; Cannister - Fuel Vapour Store
- Manufacturer Note: Complete Asy - Bracket, Canister And Hoses
- Replaces: 5L1Z-9D653-BA, 5L1Z-9D653-AB
- Base No.: 9D653
- Item Weight: 12.80 Pounds
- Item Dimensions: 24.2 x 7.4 x 31.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L1Z-9D653-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Lincoln Navigator Vapor Canister Part Number: 2L1Z-9D653-BA
Product Specifications- Other Name: Cannister - Fuel Vapour Storage; Cannister - Fuel Vapour Store
- Manufacturer Note: Complete Asy - Bracket, Canister And Hoses
- Base No.: 9D653
- Item Weight: 9.30 Pounds
- Item Dimensions: 23.6 x 21.7 x 12.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L1Z-9D653-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Lincoln Navigator Vapor Canister
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Lincoln Navigator Vapor Canister available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Lincoln Navigator Vapor Canister as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Lincoln Navigator Vapor Canister Parts Q&A
- Q: How to Safely Disconnect and Remove the Vapor Canister from the Evaporative Emissions System on 2006 Lincoln Navigator?A: Each component of the evaporative emissions system contains both fuel vapor and condensed fuel vapor that create potential fire and explosion risks so the battery ground cable needs disconnection as a safety precaution against electrical sparks occurring when fuel vapor or liquid fuel is present. Workshops must remain free from open flames together with no smoking when performing operations on fuel-related components. A hoisted vehicle operating in neutral position should first have its spare tire removed. First disconnect the power connector from the EVAP canister vent solenoid before removing the fuel vapor tube quick connect coupling from the EVAP canister and the fuel vapor vent tube from the dust separator. The EVAP canister bolt should be fitted to the side rail after tightening to 15 Nm (11 lb-ft). You should disconnect the EVAP canister and fuel filler pipe bolt from the crossmember and tighten them to 15 Nm (11 lb-ft) for installation. When reinstalling the two EVAP canister bolts onto the spare tire carrier maintain a torque of 25 Nm (18 lb-ft). Put the EVAP canister bracket assembly on a tidy surface while removing the EVAP canister vent solenoid-to-EVAP canister hose and the hose from the dust separator. While removing or installing the EVAP canister use the brackets tabs to detach and fasten it back. The system must complete a leak test after which the evaporative emissions repair verification drive cycle needs to be executed.