FordParts
My Garage
My Account
Cart
OEM 2006 Mercury Grand Marquis Catalytic Converter
Cat. Converter- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
6 Catalytic Converters found
Product Specifications- Other Name: Converter Assembly; Catalytic Converter, Right; Converter
- Position: Passenger Side
- Base No.: 5E212B
- Item Weight: 16.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W1Z-5E212-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Converter Assembly; Catalytic Converter, Left; Converter
- Manufacturer Note: LH converter - ID#: "MON" (Note: Warranty Repairs - please check for Technical Service Publications i.e. SSM, TSB prior to ordering this part)., FROM 11/29/2004
- Position: Driver Side
- Base No.: 5E212A
- Item Weight: 15.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5W1Z-5E212-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Converter Assembly; Catalytic Converter, Right; Converter
- Manufacturer Note: RH converter - ID#: "KEY" (Note: Warranty Repairs - please check Technical Service Publications i.e. SSM, TSB prior to ordering this part)., FROM 11/29/2004
- Position: Passenger Side
- Base No.: 5E212B
- Item Weight: 16.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5W1Z-5E212-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Converter Assembly; Catalytic Converter, Left
- Manufacturer Note: LH converter - ID# "BLE", GCC, FROM 12/5/05
- Position: Driver Side
- Base No.: 5E212B
- Item Weight: 14.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W1Z-5E212-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Converter Assembly; Catalytic Converter, Left; Converter
- Position: Driver Side
- Base No.: 5E212A
- Item Weight: 15.50 Pounds
- Item Dimensions: 15.0 x 11.0 x 17.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W1Z-5E212-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Converter Assembly; Catalytic Converter, Right; Converter
- Position: Passenger Side
- Base No.: 5E212B
- Item Weight: 16.00 Pounds
- Item Dimensions: 14.5 x 10.8 x 18.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W1Z-5E212-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Mercury Grand Marquis Catalytic Converter
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Mercury Grand Marquis Catalytic Converter available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Mercury Grand Marquis Catalytic Converter as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Mercury Grand Marquis Catalytic Converter Parts Q&A
- Q: How to service and repair the catalytic converter on 2006 Mercury Grand Marquis?A: Begin the catalytic converter service by depowering any fire suppression system if it exists to maintain safety. Place the vehicle onto the hoist in neutral position. It is necessary to switch off power to an air suspension system before any procedure involving hoisting or jacking or towing to stop unexpected air spring inflation or deflation events. The service process requires removing both electrical connectors from the heated oxygen sensor (H02S) and catalyst monitor sensor (CMS). The installer should discard the two catalytic converter-to-exhaust manifold nuts before installation while tightening them to 40 Nm (30 ft. lbs.) at the end. Begin by removing the catalytic converter-to-outlet pipe bolts and flag nuts before taking out the damper then discarding all three items including the bolts and flag nuts. During new catalytic converter installation workers must apply anti-seize lubricant to sensor threads followed by removal of H02S and CMS before tightening the sensors to 41 Nm (30 ft. lbs.). All joint surfaces between the exhaust manifold and outlet pipe and catalytic converter need clean-up before new exhaust system fasteners and gaskets are installed. Wet run all fasteners at first on the front of the vehicle before any tightening occurs. The correct placement of the converter depends on alternately fastening the exhaust manifold nuts to catalytic converter while tightening the bolts connecting the converter to the inlet pipe according to manufacturer specifications. Equipping your vehicle with a fire suppression system needs a repower process following the installation completion.