How to service spark plugs on 2006 Mercury Grand Marquis?

Start service of spark plugs by dismantling the ignition coil-on-plugs. Compressed air should be used to clean foreign material from the spark plug well before beginning the plug removal process. An inspection of spark plugs must be conducted after you remove them. You should install new or inspected spark plugs and torque them to 15 Nm (11 lb-ft) before adjusting the gap according to specifications then follow the reverse order of removal steps to finish installation.

OEM 2006 Mercury Grand Marquis Spark Plug

Ignition Spark Plug

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Spark Plug found

View related parts
2006 Mercury Grand Marquis Spark Plug
Part Number: AGSF-32P-MX
$6.04 MSRP: $9.35
You Save: $3.31 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaces: AGSF-32P-M, AGSF-32P-MF4, SP-493
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AGSF-32P-MX
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2006 Mercury Grand Marquis Submodels:
- GS, GSL, Limited Edition, LS, LSE, Ultimate Edition | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2006 Mercury Grand Marquis Spark Plug

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Mercury Grand Marquis Spark Plug available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Mercury Grand Marquis Spark Plug as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Mercury Grand Marquis Spark Plug Parts Questions & Experts Answers

Q: How to service spark plugs on 2006 Mercury Grand Marquis?
A: Start service of spark plugs by dismantling the ignition coil-on-plugs. Compressed air should be used to clean foreign material from the spark plug well before beginning the plug removal process. An inspection of spark plugs must be conducted after you remove them. You should install new or inspected spark plugs and torque them to 15 Nm (11 lb-ft) before adjusting the gap according to specifications then follow the reverse order of removal steps to finish installation.