FordParts
My Garage
My Account
Cart
OEM 2006 Mercury Mariner Seat Switch
Seat Adjust Switch- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Seat Switches found
2006 Mercury Mariner Switch Part Number: 5L8Z-14D694-AAA
$25.26 MSRP: $34.37You Save: $9.11 (27%)Product Specifications- Other Name: Switch Assembly; Seat Heater Switch
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.4 x 2.9 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L8Z-14D694-AAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Mercury Mariner Seat Switch, Front Part Number: 3F2Z-14A701-AA
Product Specifications- Other Name: Switch Assembly; Power Seat Switch, Front, Left; Switch; Power Seat Switch
- Manufacturer Note: Driver And Passenger Seat
- Position: Front
- Replaces: YL8Z-14A701-AA
- Base No.: 14A701
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.2 x 3.4 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3F2Z-14A701-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Mercury Mariner Seat Switch
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Mercury Mariner Seat Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Mercury Mariner Seat Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Mercury Mariner Seat Switch Parts Q&A
- Q: What precautions should be taken when servicing the power seat switch to ensure safety on 2006 Mercury Mariner?A: Safety glasses must be worn while servicing the power seat switch because accidental air bag deployment can cause injuries during air bag module or safety belt pretensioner handling. You should never probe the connectors of air bag modules or pretensioners because it can trigger a deployment that will result in personal injuries. The use of memory saver devices should be avoided to minimize possible injuries. The team must perform a several-point check to disable the supplement restraint system before starting the job. The air bag warning light should turn on when the vehicle is in ON mode alongside the RCM fuse removal. This normal condition does not indicate any faults in the system. The vehicle can only be handed over to the customer when the SRS shows full performance and no faulty readings. Depowering the SRS should be the first step before both the recliner handle cover and the seat control switch knob are removed from the system. The process starts by removing three screws holding the outboard front seat side cushion shield and demands connection removal of heated seat switch electrical connector before progressing to disconnecting the seat control switch electrical connector. Safely remove the three screws from the seat control switch and tighten the new switch to 7 Nm (62 lb-in) when installing it. Reestablish power to the SRS system after reversing all dismantling steps.