FordParts
My Garage
My Account
Cart
OEM 2006 Mercury Montego Axle Shaft
Car Axle Shaft- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
6 Axle Shafts found
2006 Mercury Montego Axle Assembly, Front Passenger Side Part Number: 5F9Z-3B436-BA
$158.52 MSRP: $219.29You Save: $60.77 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Shaft - Front Axle; CV Axle Assembly, Front Right; GSP CV Axle; Axle Shaft; CV Axle Assembly
- Position: Front Passenger Side
- Replaces: 6F9Z-3B436-B
- Base No.: 3B436
- Item Weight: 27.00 Pounds
- Item Dimensions: 7.1 x 8.8 x 46.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F9Z-3B436-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Shaft Assembly; CV Axle Assembly, Rear Left, Rear Right; Axle Shaft; Axle Assembly
- Position: Rear Passenger Side
- Replaces: 5F9Z-4K138-AA
- Base No.: 4K138
- Item Weight: 16.40 Pounds
- Item Dimensions: 30.7 x 5.1 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 6F9Z-4K138-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Shaft - Front Axle; CV Axle Assembly, Front Left; GSP CV Axle; Axle Shaft; CV Axle Assembly
- Position: Front Driver Side
- Base No.: 3B437
- Item Weight: 18.10 Pounds
- Item Dimensions: 4.9 x 4.9 x 33.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F9Z-3B437-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Shaft - Front Axle; CV Axle Assembly, Front Right; GSP CV Axle; Axle Shaft; CV Axle Assembly
- Position: Front Passenger Side
- Base No.: 3B436
- Item Weight: 26.00 Pounds
- Item Dimensions: 7.3 x 8.6 x 47.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F9Z-3B436-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Shaft - Front Axle; CV Axle Assembly, Front Right; GSP CV Axle; Axle Shaft; CV Axle Assembly
- Position: Front Passenger Side
- Replaces: 6F9Z-3B436-A
- Base No.: 3B436
- Item Weight: 27.30 Pounds
- Item Dimensions: 7.2 x 8.6 x 46.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F9Z-3B436-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Shaft - Front Axle; CV Axle Assembly, Front Left; GSP CV Axle; Axle Shaft; CV Axle Assembly
- Position: Front Driver Side
- Replaces: 6F9Z-3B437-A
- Base No.: 3B437
- Item Weight: 18.00 Pounds
- Item Dimensions: 26.5 x 4.5 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F9Z-3B437-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Mercury Montego Axle Shaft
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Mercury Montego Axle Shaft available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Mercury Montego Axle Shaft as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Mercury Montego Axle Shaft Parts Q&A
- Q: How to service the rear drive axle shafts on 2006 Mercury Montego?A: The service procedure for rear axle shafts starts by placing the vehicle in neutral position and hoisting it for access. Start by detaching the disc brake caliper through anchor bolt unscrewing while sustaining the components with mechanics wire to protect the brake hose. The installation process requires caliper torque to reach 110 Nm at 81 ft.lb. The rear axle wheel end nut requires replacement with a new one before tightening it to 200 Nm (148 ft. lbs.) through continuous rotation because this is a torque prevailing design nut that produces incorrect torque readings leading to bearing failure. Removal of the anti-lock sensor bolt should be followed by tightening the component to 14 Nm (10 ft. lbs.) before reinstalling. A suitable hub remover allows you to gently press the axle shaft until it becomes free from the hub, and then you can take out the brake disc screw and brake disc for reinstallation at 21 Nm (16 ft. lbs.) torque. The hub requires its four bolts to be removed together with the component before reinstallation where each bolt needs torque to 120 Nm (89 ft. lbs.). Using a prybar to gradually extract the axle shaft from the axle components will allow you to remove it. New circlips must be installed whenever you take out the axle shaft while beginning at one groove end and working the circlip across the axle shaft to stop its expansion. The reverse process should be used to finish the procedure.