How to Service and Repair the Motor and Transmission Mount on 2007 Ford Crown Victoria?

Service and repair procedures for the transmission mount start with depowering the fire suppression system only if the vehicle has this feature while following all essential safety warnings along with procedures. You must remove the transmission support crossmember followed by the transmission support insulator. For installing the new components follow the removal steps in reverse order before tightening all fasteners to 90 Nm (66 lb-ft). Vehicle owners must activate the fire suppression system according to safety warnings and procedures after performing installation of the system.

OEM 2007 Ford Crown Victoria Motor And Transmission Mount

Motor and Trans Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Motor And Transmission Mounts found

View related parts
2007 Ford Crown Victoria Transmission Mount, Rear
Part Number: 3W1Z-6068-BA
$42.27 MSRP: $61.53
You Save: $19.26 (32%)
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Auto Trans Mount, Rear; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount
- Manufacturer Note: Insulator & retainer, rear engine support
- Position: Rear
- Base No.: 6068
- Item Weight: 2.20 Pounds
- Item Dimensions: 6.8 x 3.1 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W1Z-6068-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Crown Victoria Submodels:
- Base, Fleet, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2007 Ford Crown Victoria Front Mount, Driver Side
Part Number: 3W1Z-6038-BA
$67.78 MSRP: $98.67
You Save: $30.89 (32%)
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount, Front Left, Left; Engine Mount Bracket; Motor Mount; Mount
- Manufacturer Note: LH, FRONT
- Position: Driver Side
- Base No.: 6038
- Item Weight: 6.10 Pounds
- Item Dimensions: 10.0 x 9.6 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W1Z-6038-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Crown Victoria Submodels:
- Base, Fleet, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2007 Ford Crown Victoria Front Mount, Passenger Side
Part Number: 3W7Z-6038-AA
$63.01 MSRP: $96.83
You Save: $33.82 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Right; Engine Mount Bracket; Motor Mount; Mount
- Manufacturer Note: RH, front, same as 3W1Z-6038-BB but without the heat shield, for lighter duty., not for police, taxi, limo or fleet.
- Position: Passenger Side
- Base No.: 6038
- Item Weight: 5.30 Pounds
- Item Dimensions: 9.4 x 8.1 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W7Z-6038-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Crown Victoria Submodels:
- Base, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2007 Ford Crown Victoria Front Mount, Passenger Side
Part Number: 3W1Z-6038-BB
$64.58 MSRP: $94.00
You Save: $29.42 (32%)
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Front Right, Right; Engine Mount Bracket; Motor Mount; Mount
- Manufacturer Note: RH, front, police, taxi, fleet, limo - severe duty
- Position: Front Passenger Side
- Base No.: 6038
- Item Weight: 5.80 Pounds
- Item Dimensions: 8.8 x 6.3 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W1Z-6038-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Crown Victoria Submodels:
- Base, LWB, LX, Police Interceptor | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2007 Ford Crown Victoria Motor And Transmission Mount

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Crown Victoria Motor And Transmission Mount available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Crown Victoria Motor And Transmission Mount as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Crown Victoria Motor And Transmission Mount Parts Questions & Experts Answers

Q: How to Service and Repair the Motor and Transmission Mount on 2007 Ford Crown Victoria?
A: Service and repair procedures for the transmission mount start with depowering the fire suppression system only if the vehicle has this feature while following all essential safety warnings along with procedures. You must remove the transmission support crossmember followed by the transmission support insulator. For installing the new components follow the removal steps in reverse order before tightening all fasteners to 90 Nm (66 lb-ft). Vehicle owners must activate the fire suppression system according to safety warnings and procedures after performing installation of the system.