How to Service and Repair the Motor and Transmission Mount on Ford Crown Victoria?

In order to service the transmission mount, disconnect the fire suppression system (where appropriate) and unbolster the transmission support crossmember and insulator. Install the new parts in the same order as they were removed and assemble the fasteners to 90 Nm (66 lb-ft). Lastly, restart the fire suppressant system, with safety protocols.

OEM Ford Crown Victoria Motor And Transmission Mount

Motor and Trans Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Motor And Transmission Mounts found

View related parts
Ford Crown Victoria Transmission Mount Part Number: F8VZ-6068-AA
$127.15 MSRP: $175.90
You Save: $48.75 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount
- Replaces: F4VY-6068-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2002 Ford Crown Victoria | Base, LWB, LX, Police Interceptor, S | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Transmission Mount, Rear Part Number: 3W1Z-6068-BA
$42.27 MSRP: $61.53
You Save: $19.26 (32%)
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Auto Trans Mount, Rear; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount
- Manufacturer Note: Insulator & retainer, rear engine support
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2011 Ford Crown Victoria | Base, Fleet, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Front Mount, Passenger Side Part Number: 3W1Z-6038-BB
$76.00 MSRP: $94.00
You Save: $18.00 (20%)
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Front Right, Right; Engine Mount Bracket; Motor Mount; Mount
- Manufacturer Note: RH, front, police, taxi, fleet, limo - severe duty
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2011 Ford Crown Victoria | Base, LWB, LX, Police Interceptor | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Front Mount, Driver Side Part Number: 3W1Z-6038-BA
$67.78 MSRP: $98.67
You Save: $30.89 (32%)
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount, Front Left, Left; Engine Mount Bracket; Motor Mount; Mount
- Manufacturer Note: LH, FRONT
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2011 Ford Crown Victoria | Base, Fleet, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Front Mount, Passenger Side Part Number: F4AZ-6038-A
$53.33 MSRP: $73.78
You Save: $20.45 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Engine Mount Bracket; Motor Mount; Mount
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1997 Ford Crown Victoria | Base, LX, Police Interceptor, S, Touring Sedan | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Front Mount, Driver Side Part Number: 1W7Z-6038-BA
$54.78 MSRP: $75.78
You Save: $21.00 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount Bracket; Engine Mount; Motor Mount; Mount
- Manufacturer Note: LH, with shield
- Position: Driver Side
- Replaces: F8VZ-6038-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2002 Ford Crown Victoria | Base, LWB, LX, Police Interceptor, S | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Front Mount, Passenger Side Part Number: 3W7Z-6038-AA
$63.01 MSRP: $96.83
You Save: $33.82 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Right; Engine Mount Bracket; Motor Mount; Mount
- Manufacturer Note: RH, front, same as 3W1Z-6038-BB but without the heat shield, for lighter duty., not for police, taxi, limo or fleet.
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2011 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Front Mount, Driver Side Part Number: F4AZ-6038-B
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount Bracket; Engine Mount; Motor Mount; Mount
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1997 Ford Crown Victoria | Base, LX, Police Interceptor, S, Touring Sedan | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS

Ford Crown Victoria Motor And Transmission Mount

Welcome to our website where you can discover high-quality, genuine Ford Crown Victoria Motor And Transmission Mount. We offer an extensive inventory of OEM Ford Crown Victoria Motor And Transmission Mount at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Crown Victoria Motor And Transmission Mount Parts and Q&A

Transmission Mount, Rear
3W1Z-6068-BA
Q: How to Service and Repair the Motor and Transmission Mount on Ford Crown Victoria?
A: In order to service the transmission mount, disconnect the fire suppression system (where appropriate) and unbolster the transmission support crossmember and insulator. Install the new parts in the same order as they were removed and assemble the fasteners to 90 Nm (66 lb-ft). Lastly, restart the fire suppressant system, with safety protocols.