How to service and repair the oil cooler on 2007 Ford Crown Victoria?

Service the oil cooler, shut off the fire suppression system, if it exists. Drain the cooling system, change the oil filter and lubricate the O-ring. Disassemble and examine the hoses on the oil cooler, but tighten them to 10 Nm when they are reattached. Unfreeze, refreeze: Reverse procedure on fire suppression system if installed.

OEM 2007 Ford Crown Victoria Oil Cooler

Engine Oil Cooler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Cooler found

View related parts
2007 Ford Crown Victoria Oil Cooler Part Number: 6W7Z-6A642-AA
Product Specifications
- Other Name: Oil Cooler Assembly; Engine Oil Cooler
- Replaces: 3W7Z-6A642-AA
- Base No.: 6A642
- Item Weight: 6.40 Pounds
- Item Dimensions: 5.9 x 5.9 x 26.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W7Z-6A642-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Crown Victoria Submodels:
- Base, Fleet, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2007 Ford Crown Victoria Oil Cooler

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Crown Victoria Oil Cooler available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Crown Victoria Oil Cooler as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Crown Victoria Oil Cooler Parts Q&A

Q: How to service and repair the oil cooler on 2007 Ford Crown Victoria?
A: Service the oil cooler, shut off the fire suppression system, if it exists. Drain the cooling system, change the oil filter and lubricate the O-ring. Disassemble and examine the hoses on the oil cooler, but tighten them to 10 Nm when they are reattached. Unfreeze, refreeze: Reverse procedure on fire suppression system if installed.