FordParts
My Garage
My Account
Cart
OEM 2007 Ford Crown Victoria Parking Brake Shoe
Emergency Parking Brake Shoe- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Parking Brake Shoe found
2007 Ford Crown Victoria Brake Shoes, Rear Part Number: 6W1Z-2N712-A
Product Specifications- Other Name: Kit - Brake Shoe And Lining; Parking Brake Shoe, Rear; Parking Brake Shoes; Shoes; Parking Brake Shoe
- Position: Rear
- Replaces: 5W1Z-2N712-A
- Base No.: 2648
- Item Weight: 2.70 Pounds
- Item Dimensions: 4.0 x 5.7 x 9.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W1Z-2N712-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Crown Victoria Parking Brake Shoe
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Crown Victoria Parking Brake Shoe available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Crown Victoria Parking Brake Shoe as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Ford Crown Victoria Parking Brake Shoe Parts Q&A
- Q: How to service and repair the parking brake shoes on 2007 Ford Crown Victoria?A: A vital prerequisite for working on parking brake shoes is turning off the air suspension electrical power using the air suspension switch located in the luggage compartment which protects against unexpected air spring inflation-deflation injuries. Before starting service or repairs on the parking brake shoes the vehicle owner should disable any existing fire suppression system. Position the vehicle at neutral state before you mount it on a hoist system and extract the rear brake disc. The adjuster removal process begins with dividing the brake shoe return spring from the adjusting spring while using a scratch awl as an assisting tool to perform the separation. The parking brake actuator removal starts with pushing brake shoes close to each other before pulling out the actuator so you can disconnect the parking brake cable end. The proper order is to disconnect the brake shoe hold-down springs followed by removal of parking brake shoe and its attached linings. Check all elements for severe wear or damage before making new replacements. The installation requires reversing uninstallation procedures while applying anti-seize lubricant to brake shoe points and adjusting screws for fitting new brake shoes. A suitable brake adjusting gauge should be used to achieve a 0.5 mm (0.020 inch) reduction from the inside diameter of the drum portion of the brake disc with the rear brake shoe and lining diameter before adjusting parking brake cable tension. The parking brake needs testing for normal operation before proceeding to activate the fire suppression system (if it exists).