FordParts
My Garage
My Account
Cart
OEM 2006 Ford Crown Victoria Parking Brake Shoe
Emergency Parking Brake Shoe- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Parking Brake Shoe found
2006 Ford Crown Victoria Brake Shoes, Rear Part Number: 6W1Z-2N712-A
Product Specifications- Other Name: Kit - Brake Shoe And Lining; Parking Brake Shoe, Rear; Parking Brake Shoes; Shoes; Parking Brake Shoe
- Position: Rear
- Replaces: 5W1Z-2N712-A
- Base No.: 2648
- Item Weight: 2.70 Pounds
- Item Dimensions: 4.0 x 5.7 x 9.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W1Z-2N712-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford Crown Victoria Parking Brake Shoe
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Crown Victoria Parking Brake Shoe available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Crown Victoria Parking Brake Shoe as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Ford Crown Victoria Parking Brake Shoe Parts Q&A
- Q: How to service and repair the parking brake shoes on 2006 Ford Crown Victoria?A: The first step for parking brake shoe servicing requires disabling the air suspension system power by engaging the air suspension switch in the luggage compartment to stop unexpected spring inflation or deflation because shifting could result in injury to personnel. Proceed only after depowering fire suppression systems when they are present on the vehicle. Set the vehicle gear to neutral and place it on the hoist. Remove the rear brake disc first before proceeding to the adjuster by removing brake shoe return spring and adjusting spring with the help of a scratch awl tool. Remove the parking brake actuator through a process of pushing the brake shoes together before extracting it then unfasten the parking brake cable termination. The following operation involves removing both brake shoe hold-down springs as well as the parking brake shoe alongside its linings. The inspection must detect any broken or deteriorated components which need immediate replacement. The procedure for installation includes applying anti-seize lubricant to the brake shoe contact point followed by rear brake shoe assembly before lubricating adjusting screw threads. A proper brake adjusting gauge should be used to adjust the rear brake shoe and lining diameter to 0.5 mm (0.020 inch) less than the inside diameter of the brake drum section of the brake disc while adjusting the parking brake cable tension then verifying that the parking brake operates normally. Start the vehicle again after doing the installation when the vehicle contains a fire suppression system.