How to service the wiper motor on 2007 Ford E-150?

Service of the wiper motor requires first taking off both windshield wiper pivot arms and cowl top vent panels. Service on the wiper motor begins by disconnecting the windshield wiper mounting arm along with pivot shaft which leads to removing the dash panel access cover and the retaining clip. Disconnect the windshield wiper mounting arm along with the pivot shaft from the wiper motor before removing the motor through removal of its electrical connector and three bolts which should be tightened to 4 Nm (35 lb-in) torque. You should reverse the whole procedure at the end of the installation.

OEM 2007 Ford E-150 Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wiper Motor found

View related parts
2007 Ford E-150 Wiper Motor, Front
Part Number: LC2Z-17508-A
$144.82 MSRP: $229.96
You Save: $85.14 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Assembly - Wiper; Windshield Wiper Motor, Front; Motor
- Position: Front
- Condition: New
- Fitment Type: Direct Replacement
- SKU: LC2Z-17508-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2007 Ford E-150 Submodels:
- Base, Chateau, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG

2007 Ford E-150 Wiper Motor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford E-150 Wiper Motor available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford E-150 Wiper Motor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford E-150 Wiper Motor Parts Questions & Experts Answers

Q: How to service the wiper motor on 2007 Ford E-150?
A: Service of the wiper motor requires first taking off both windshield wiper pivot arms and cowl top vent panels. Service on the wiper motor begins by disconnecting the windshield wiper mounting arm along with pivot shaft which leads to removing the dash panel access cover and the retaining clip. Disconnect the windshield wiper mounting arm along with the pivot shaft from the wiper motor before removing the motor through removal of its electrical connector and three bolts which should be tightened to 4 Nm (35 lb-in) torque. You should reverse the whole procedure at the end of the installation.